Author Topic: 181 wiring  (Read 1000 times)

0 Members and 0 Guests are viewing this topic.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181
Re: 181 wiring
« Reply #10 on: May 20, 2012, 12:25:57 pm »
Okie dokie ,here ya go .Reference 281 .With the saw laying bar down recoil cover off .The left side of the coil has a blue wire going to the kill switch .Right side red wire which goes to the trigger unit .The wires are routed from the air box up around the cover under the recoil top side .You pull the recoil off it has another shrouding piece over the flywheel which is where the wires attach .

Because of the difference from Stihl to Husqvarna with the shock mounts the air box appears to pivot with the engine . As far I know it needs no ground bonding jumper as does Stihl with a set up like that .The trigger unit doesn't have a ground bonding jumper either .


Related Topics

  Subject / Started by Replies Last post
3 Replies
Last post March 16, 2015, 11:37:57 am
by fossil
8 Replies
Last post January 04, 2017, 05:45:03 pm
by 1manband