Author Topic: 1984 Husky 44 Ignition  (Read 965 times)

0 Members and 0 Guests are viewing this topic.

Offline johnaron

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
1984 Husky 44 Ignition
« on: September 08, 2014, 01:50:43 pm »
New to the forum, Tx….Can't get a spark. Probably coil. Original owner. Service / parts list 11, SX 84.023
Saw ID: s/n 5122228
Coil p/n 501-5972-01 Black potting, stamped on; Germany…2 204 222 65
Module p/n 505 32 55-39. Printed on; IIDA, EY850, JAPAN
My cheap ohmmeter(only one scale, smallest tick's 100 ohms) Spark plug cap to ground 8.5K. primary shows short. What should I read?
The module resistance is 4.5K
If the coil's bad, are there any replacements available?
Tx for any help!…. J Aronson, Litchfield, ME

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 1984 Husky 44 Ignition
« Reply #2 on: September 08, 2014, 07:43:56 pm »
No way to remove the laminated poles and use another model coil? 

Offline johnaron

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: 1984 Husky 44 Ignition
« Reply #3 on: September 10, 2014, 07:36:53 am »
To aclarke, tx …..I think i can get the coil off the core. Next, where will I find a replacement coil. Does anyone rewind these things?
How can I be sure this one's really bad?
Tx.. J

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 1984 Husky 44 Ignition
« Reply #4 on: September 10, 2014, 09:49:51 am »
Test resistance on primary/secondary coils, don't have specs on hand but I can look it up or some else may know an acceptable value off hand.   If you don't have a multimeter your local saw shop would be familiar with that procedure.  The laminated frame will usually come out easily if you hold the coil portion loosely in a vise.  I'm not familiar with that particular saw but the idea is to use the original coil frame that screws to your case and find a replacement coil portion that fits within the original. Space.  I've done this a few times and it may be a worth a shot if the oem piece is NLA ...

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 1984 Husky 44 Ignition
« Reply #5 on: September 10, 2014, 09:52:42 am »
Read on the net that a Mac Titan coil may work too. Be worth a shot.

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 1984 Husky 44 Ignition
« Reply #6 on: September 10, 2014, 09:59:19 am »
Post a pic and a part number, should be able to find something from another saw that used that coil

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: 1984 Husky 44 Ignition
« Reply #7 on: September 10, 2014, 01:11:03 pm »
My mouse is broken can't right click for copy/paste.  See earlier post on Husky 44.  Husky 55 coil is supposed to work w/relocted mounting holes.  I have a bunch of 44 coils PM me if interested.
Shep

Offline johnaron

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: 1984 Husky 44 Ignition
« Reply #8 on: September 10, 2014, 03:48:28 pm »
To aclarke…
Coil p/n 501-5972-01
Don't know how to do attachments. I have some pics

Offline johnaron

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: 1984 Husky 44 Ignition
« Reply #9 on: September 11, 2014, 04:03:10 pm »
I'm back. Just got res.  from Lee at Bill's saw shop in Salamanca, NY (tx, Lee) . Pri 0.8 ohm, Sec 9Kohm. Just discovered my 8.6K jumps good to open by moving the plug wire around at the coil connection. The diag. shows the plug wire as a separate part #. Does this wire just plug into the coil assembly? I can spin the wire around at the junction. It doesn't pull out. Any help ?
TX all…. J

 

Related Topics

  Subject / Started by Replies Last post
14 Replies
749 Views
Last post May 05, 2018, 06:52:52 am
by Cut4fun .
4 Replies
279 Views
Last post March 22, 2013, 10:13:50 pm
by 660magnum
3 Replies
370 Views
Last post July 29, 2013, 06:15:02 pm
by sharkey
3 Replies
455 Views
Last post November 30, 2014, 10:42:34 pm
by mikehonda
Ignition Stihl 064

Started by Hook « 1 2 3 » Stihl

25 Replies
1166 Views
Last post January 19, 2014, 07:50:21 pm
by roostersgt
1 Replies
430 Views
Last post January 07, 2014, 11:28:23 pm
by jmester
3 Replies
179 Views
Last post January 13, 2014, 08:15:53 pm
by KilliansRedLeo
028 ignition problem

Started by mark3885 « 1 2 3 » Stihl

24 Replies
333 Views
Last post March 24, 2014, 09:24:22 am
by mark3885
075 ignition

Started by shawn « 1 2 » Stihl

17 Replies
388 Views
Last post August 01, 2014, 04:54:40 pm
by president
0 Replies
2382 Views
Last post August 10, 2014, 09:06:55 pm
by foggysail