Author Topic: Husqvarna 2100 2101 1100 298  (Read 2785 times)

0 Members and 1 Guest are viewing this topic.

Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 2100 no power in the cut
« Reply #10 on: July 12, 2014, 05:46:13 pm »
Apparently the larger of the two welsh plugs is an exact fit for the hole for the brass screw governor, so I have been told.

Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22127
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 no power in the cut
« Reply #11 on: July 12, 2014, 05:53:22 pm »
Apparently the larger of the two welsh plugs is an exact fit for the hole for the brass screw governor, so I have been told.



Never even thought about that. Good to know and share. Thanks.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: 2100 no power in the cut
« Reply #12 on: July 13, 2014, 03:33:23 pm »
I use a piece of aluminum cut from a beer can with a .250" hollow punch.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Useful Useful x 1 View List

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2757
  • Karma: 172
Re: 2100 no power in the cut
« Reply #13 on: July 22, 2014, 07:52:44 pm »
I had thought I defeated the gov on mine but evidently I had missed something .Never the less it still does good .However like most of my larger saws it doesn't get much action .

Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 2100 no power in the cut
« Reply #14 on: July 23, 2014, 07:20:56 pm »
I have rebuilt the carb, but it had NO positive effect.
I have ordered a cheap pressure/vacuum tester to check the carb.
Hope to get that Thursday or Friday.
I took off the muffler to see if it was restricting the exhaust.
The muffler looked pretty empty except for the spark arrestor and it was clean.
Took a photo of the piston and rings.
Looks pretty good to me.


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 2100 no power in the cut
« Reply #15 on: July 23, 2014, 08:27:53 pm »
I have a saw that the piston looks brand new with all the machining marks on the exhaust side. To look down the boot it looks smooth on the intake side.

I got ready to put rings in it.

When I pulled the cylinder off, sure enough, the intake side was smooth as a baby's butt but there were no machining marks left. I decided to put a piston in it also for a long term repair. Nothing like leaking around the intake port and spitting back through the carburetor.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 2100 no power in the cut
« Reply #16 on: July 24, 2014, 09:50:20 am »
Here is the carb side of the piston.


Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 2100 no power in the cut
« Reply #17 on: July 24, 2014, 06:19:49 pm »
I have rebuilt the carb and did a pressure test on it.
It holds an 8 PSI pressure with no problem.

Looks like I am going to need our leader take a look at this saw and do his "redneck" magic on it.
Hey Kevin, you want to play with this big boy?

Chuck

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22127
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 no power in the cut
« Reply #18 on: July 24, 2014, 08:56:24 pm »
Bring it on down and I'll take a gander at it.    I'm pretty much caught up right now too.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22127
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 no power in the cut
« Reply #19 on: July 24, 2014, 08:58:30 pm »
Is that a crack in the intake block ( top right)?

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
460 Views
Last post July 31, 2011, 12:00:53 pm
by Cut4fun .
1 Replies
531 Views
Last post July 06, 2011, 06:25:52 am
by Al Smith
3 Replies
376 Views
Last post October 30, 2012, 07:54:20 pm
by Cut4fun
Husqvarna 2100

Started by darren_palms « 1 2 ... 6 7 » Husqvarna

63 Replies
1339 Views
Last post April 25, 2015, 10:21:41 am
by Cut4fun .
Husqvarna 2100

Started by turbo885 « 1 2 3 4 5 » Husqvarna

46 Replies
1081 Views
Last post February 03, 2014, 05:04:02 pm
by Eccentric
11 Replies
1007 Views
Last post October 06, 2013, 10:12:00 pm
by stihls066
5 Replies
230 Views
Last post October 05, 2013, 01:44:26 am
by Eccentric
10 Replies
476 Views
Last post August 15, 2014, 06:03:50 am
by man of stihl
12 Replies
386 Views
Last post May 13, 2015, 06:41:55 pm
by SquareFile
1 Replies
90 Views
Last post May 24, 2018, 02:27:47 pm
by Cut4fun .