Author Topic: Husqvarna 2100 2101 1100 298  (Read 2672 times)

0 Members and 0 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 2100 no power in the cut
« Reply #30 on: July 25, 2014, 11:32:29 am »
That insulator block is made of a polypropylene type plastic or what we old timers call white nylon. Super glue with not actually stick to it or have any solvent reaction with the plastic but it may possibly fill the void?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21877
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 2100 no power in the cut
« Reply #32 on: July 25, 2014, 12:18:52 pm »
Thanks Kevin

Offline sharkey

  • Piped Saw
  • *****
  • Posts: 367
  • Karma: 37
Re: 2100 no power in the cut
« Reply #33 on: July 26, 2014, 08:10:29 pm »
There is a compound called 'Plast-Aid' that you can make a new one from.  You will need to use the old one as mold.  Take a look; http://www.youtube.com/watch?v=IkTSpmS1zXY

http://www.plast-aid.com/

Ive called them on some projects and they were quite helpful.
Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: 2100 no power in the cut
« Reply #34 on: July 29, 2014, 09:28:52 am »
Has the intake block come in and installed yet to see if that was the problem?
REDNECK Saw Repair

Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 2100 no power in the cut
« Reply #35 on: July 29, 2014, 09:35:50 am »
I got the intake block Monday morning and installed it.
Still have the same problem. 
No worse, no better.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21877
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 no power in the cut
« Reply #36 on: July 29, 2014, 10:01:46 am »
Dang. 
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21877
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 no power in the cut
« Reply #37 on: July 30, 2014, 07:11:53 pm »
I just spent 2hrs with this 2100. First tested and seen what owner was talking about. Start making cut and it would shut off. Tried it a couple times same thing.

Took it to the bench and pulled carb and tore it down checking things. I adjusted the fulcrum and the needle look new so put it back.  You replaced the needle right? Diaphragms looked good on both sides, so no use opening that new kit IMO.  The choke wasnt closing all the way but that is another story. Fixed.

Checked spark with the new tool and even after stops and testing it showed. GREEN (flashing) Proper voltage, ingnition is OK

I made  4 full cuts in 17.5" dry maple no problems and starting on 5th cut when raised up out of wood to hit 5th cookie she went into a run on like on the race saws. I hit the kill switch and it did nothing. So I then took my hand and pushed into the green weenie filter to block off air to shut her down.

While still hot I started trying to start and check things and it was just erratic with it's idle and starting when hot.

I am thinking there are bigger issues here from a  air leak once warmed up.  What do you all think, seals, base,  etc?

I dont know 2100's so hoping you all can shed some light. 
 
REDNECK Saw Repair Getter Done

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 2100 no power in the cut
« Reply #38 on: July 30, 2014, 08:53:30 pm »
I wish I could give you a definitive answer, but I can't the air leak is a good possibility though.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21877
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 no power in the cut
« Reply #39 on: July 30, 2014, 09:31:28 pm »
The way it acted once warmed up made me think seals. 

When cold had perfect idle and blipping up to rpm. Walked to back to make test cuts and after it got hot after 4th cookie is when it acted up.

Also noticed someone at one time drilled a much larger hole in the carb cover over metering diaphragm. The oem one is still there too off to  the side.

Something weird I noticed is this cylinder is black. Dont look painted?
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
443 Views
Last post July 31, 2011, 12:00:53 pm
by Cut4fun .
1 Replies
528 Views
Last post July 06, 2011, 06:25:52 am
by Al Smith
3 Replies
370 Views
Last post October 30, 2012, 07:54:20 pm
by Cut4fun
Husqvarna 2100

Started by darren_palms « 1 2 ... 6 7 » Husqvarna

63 Replies
1313 Views
Last post April 25, 2015, 10:21:41 am
by Cut4fun .
Husqvarna 2100

Started by turbo885 « 1 2 3 4 5 » Husqvarna

46 Replies
1071 Views
Last post February 03, 2014, 05:04:02 pm
by Eccentric
11 Replies
1001 Views
Last post October 06, 2013, 10:12:00 pm
by stihls066
5 Replies
226 Views
Last post October 05, 2013, 01:44:26 am
by Eccentric
10 Replies
462 Views
Last post August 15, 2014, 06:03:50 am
by man of stihl
12 Replies
380 Views
Last post May 13, 2015, 06:41:55 pm
by SquareFile
1 Replies
84 Views
Last post May 24, 2018, 02:27:47 pm
by Cut4fun .