Author Topic: 2100 piston husqvarna  (Read 1036 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #10 on: July 21, 2015, 04:56:06 pm »
Wonder what brand this aftermarket 2100 is being sold under.

HUSQVARNA 2101 2100 1100 PISTON KIT

NEW quality aftermarket PISTON KIT that fits HUSQVARNA 2100, 2101, 1100

    Piston  Ring diameter is 56MM.

    Replaces Part Number 5012911002

   

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #11 on: July 21, 2015, 04:57:14 pm »
Good thread on all this already 2100 performance with husqvarna 395 piston. http://chainsawrepair.createaforum.com/husqvarna/husqvarna-2100-performance-upgrade/
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #12 on: July 21, 2015, 05:33:16 pm »
I posted the above pic in another 2100 p thread to see if anyone recognize it.

Turtle might be onto something.  = looks like the one grits&gravy got that was a mahle.

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #13 on: July 21, 2015, 05:50:12 pm »
Shows 5 in stock but could be junk. Ordering from itacostore Sg Singapore, Singapore 

http://www.bonanza.com/listings/husqvarna-2101-2100-1100-piston-kit-w-ring-set-new-/89018979
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: 2100 piston
« Reply #14 on: July 21, 2015, 07:21:17 pm »
That "Mahle" piston has me suspicious.  Box and packaging look similar to what Little Red Barn has been shilling for a while (with the exception of the "Original Mahle" lettering.

There's no damn way that Mahle would be selling pistons to an outfit that sells out of Singapore too.

LRB has sold pistons sourced from factories in Taiwan, Mainland China, and India IIRC....
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #15 on: July 21, 2015, 07:37:34 pm »
Shaun brought that up about that mahle one just being a fake copy like the one I showed. Except it is being sold as a mahle.

scarr = I was referring to the ones Turtle bought. China made copies are getting sneakier every day. They even get the marking and boxing correct.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #16 on: July 21, 2015, 08:01:11 pm »
Found grits and gravy post on the aftermarket  mahle pistons with the meteor price.  Pics above.

Amazing how they look just like that sing cheap one I found.

GG = In my quest for an episan 2101xp piston I ordered a couple that I only had pictures of which looked like episan, this was just a gamble as I am getting kind of desperate.. Once they got dropped off by the mailman they were in fact not episan, but mahle brand... They look to be better quality than any other AM piston I have ever purchased, I assume this is due to the fact that mahle built quite a bit of the big name OEM stuff..

I only purchased 2 which was all they had on the shelf, but I am working on trying to purchase more through this same seller.

If anyone on here is interested in buying one let me know and I will try to get as many as I can.

If I can in fact get more I will reship them at my cost to any needing however many they need... Cost is on par with meteor but might get cheaper with a big buy.



The one I found in sing
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Online srcarr52

  • 6 cube
  • ****
  • Posts: 288
  • Karma: 93
  • Location: IA
Re: 2100 piston
« Reply #18 on: July 22, 2015, 10:02:09 am »
They might be chicom but they do look like decent quality castings. I'd give one a shot.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2100 piston
« Reply #19 on: July 22, 2015, 12:53:13 pm »
They might be chicom but they do look like decent quality castings. I'd give one a shot.

The ones in sing show 5 in stock and $33 shipping for all 5 or $7 for 1.  So $20 total to check one out to try.

I think the 2 GG bought are the 2 bought from the 15 on june 24 2 bought together. They do all appear to be the same piston IMO.  If I was into the 2100 I would try one myself too. In a stock saw for sure.

I have been trying stuff like these before and some still holding up. Even though I know better to run their rings and circlips. I did just to see. So far so  good for  firewood cutting use. 

$15 to my door 066 piston I have been using as compete set.  Doing same thing with a BB372 piston.




REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
531 Views
Last post July 06, 2011, 06:25:52 am
by Al Smith
Husqvarna 2100

Started by darren_palms « 1 2 ... 6 7 » Husqvarna

63 Replies
1336 Views
Last post April 25, 2015, 10:21:41 am
by Cut4fun .
0 Replies
165 Views
Last post January 18, 2013, 10:20:59 pm
by darren_palms
Husqvarna 2100

Started by turbo885 « 1 2 3 4 5 » Husqvarna

46 Replies
1081 Views
Last post February 03, 2014, 05:04:02 pm
by Eccentric
151 Replies
2752 Views
Last post October 23, 2019, 01:38:04 pm
by raumato01
41 Replies
1268 Views
Last post May 08, 2015, 12:14:40 pm
by aclarke
13 Replies
399 Views
Last post May 15, 2015, 05:37:49 pm
by EHP
9 Replies
324 Views
Last post February 12, 2016, 06:47:54 pm
by 604f_1
0 Replies
64 Views
Last post October 26, 2016, 02:37:29 pm
by Cut4fun
3 Replies
217 Views
Last post April 27, 2017, 12:58:18 am
by mdavlee .