Author Topic: 265rx  (Read 511 times)

0 Members and 0 Guests are viewing this topic.

Offline Dancan

  • 3 cube
  • *
  • Posts: 14
  • Karma: 0
265rx
« on: April 24, 2011, 10:17:30 am »
I know , it's a clearing saw not a chainsaw .
I've got an issue with mine that it keeps loosening the nut that holds the blade (replaced last year for the same issue) .
Any insight would be helpful .

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4044
  • Karma: 159
  • OHIO REDNECK
Re: 265rx
« Reply #1 on: April 24, 2011, 06:53:32 pm »
I know nothing on this but someone should. Shows part 28 being a LOCKING nut. Are you using locking?

Husqvarna 265RX owners manual with parts list
REDNECK Saw Repair

Offline Dancan

  • 3 cube
  • *
  • Posts: 14
  • Karma: 0
Re: 265rx
« Reply #2 on: April 27, 2011, 08:30:16 pm »
Thanks for posting the link .
I have replaced the nut , flange and blade and thought the problem was solved , after a couple of gallons of fuel the issue is back .
I open to suggestions .

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: 265rx
« Reply #3 on: April 27, 2011, 09:19:55 pm »
What blade are you running? Had one blade that never would stay tight on my 250. Tossed it and never had trouble since.

Offline Dancan

  • 3 cube
  • *
  • Posts: 14
  • Karma: 0
Re: 265rx
« Reply #4 on: April 30, 2011, 05:50:47 am »
The original was from Husky , this one is from Stihl , I'll swap it with the one from my FS550 and try that (better stud/nut setup on the Stihl) .