Author Topic: 3120 big bore kit  (Read 2906 times)

0 Members and 0 Guests are viewing this topic.

Offline mcbob

  • 6 cube
  • ****
  • Posts: 261
  • Karma: -83
  • Location: Weston NSW Australia
Re: 3120 big bore kit
« Reply #50 on: August 25, 2013, 07:21:20 pm »
I bet those boys beat you just the same. yep that is the case but hey who cares it's only another day in the sun.

No one needs me,,,,, but you sure got a bloody lot of mileage from me, something you could not ever do yourself. ..... talk about waving your own flag Neil again in case we missed you the first time
I am a idiot so my pics disappeared.

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: 3120 big bore kit
« Reply #51 on: August 25, 2013, 08:21:36 pm »
the 3160 is a 090 jug mounted on a 3120 crankcase , its nothing new , Marcel built a couple in the later 90's , these are 66mm bore , I built a while ago a 72mm bore motor and it ran pretty good but starting the dam thing was unreal so I scrape the motor , if you were over the block it would of been pretty good but cold start  no way

Offline mcbob

  • 6 cube
  • ****
  • Posts: 261
  • Karma: -83
  • Location: Weston NSW Australia
Re: 3120 big bore kit
« Reply #52 on: August 26, 2013, 12:20:30 am »
Yeah that's old hat I have that already here so no need to duplicate oneself, I just ordered a custom built stroker an hour ago

Love and kisses McBob.

Better unblock yourself Neil if you wish to stay one of the informed and enlightened ones
I am a idiot so my pics disappeared.

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: 3120 big bore kit
« Reply #53 on: August 26, 2013, 10:11:50 am »
Neil I would not worry to much and I'm sure your not  ;D, Mcbob let us all know who you got to built you a stroker ?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21944
  • Karma: 531
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 3120 big bore kit
« Reply #54 on: August 26, 2013, 12:57:18 pm »
neil, the 2x3120's just showed up on my end to see.  Cool. Any video or better pics?  Bet that was a handful to handle in itself
REDNECK Saw Repair Getter Done

Offline neil

  • 5 cube
  • ***
  • Posts: 135
  • Karma: 21
Re: 3120 big bore kit
« Reply #55 on: August 26, 2013, 04:28:33 pm »
Neil I would not worry to much and I'm sure your not   

No Ed you are right, no competitor who has actually met him would ever be worried about him.
I'm not sure on our regular competing numbers at present but a quick guess is 90 - 100 between Sydney and the top of QLD.
Thank god the regular racers don't feel the need to start a thread every time they decide to change a spark plug, they simply race and enjoy what comes with this physical sport we choose and do not need to make up stories to gain attention,,,, they already have it.

Offline neil

  • 5 cube
  • ***
  • Posts: 135
  • Karma: 21
Re: 3120 big bore kit
« Reply #56 on: August 26, 2013, 04:33:45 pm »
neil, the 2x3120's just showed up on my end to see.  Cool. Any video or better pics?  Bet that was a handful to handle in itself

Kevin, I do have some better pics of the old twin, I sold it off years ago to another NSW stall ward who run it for a few seasons.
I found some old video footage some time back, in the 90's / early 00's we never took video footage like today.
Most competitors video each run to find mistakes but in those days it wasn't so important. I will have to cut out a few runs I made with it.

Offline mcbob

  • 6 cube
  • ****
  • Posts: 261
  • Karma: -83
  • Location: Weston NSW Australia
Re: 3120 big bore kit
« Reply #57 on: August 26, 2013, 05:45:01 pm »
EHP I thought you would have worked that one out for yourself ................... Keith did a really nice job rebuilding your twin 3120 and now the saw looks and goes hard thanks to Kieth's hard work
hope he comes back and races it again you must now be green with envy ............ and good luck in out phycing him
I am a idiot so my pics disappeared.

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: 3120 big bore kit
« Reply #58 on: August 26, 2013, 06:17:40 pm »
Mcbob I'm not worried but any one building a  alcohol 3120 stroker better be if coming from over here and I was told the limit was 140cc for over there but I think there is alot of different rules cause alot of place down under is gas only

Offline mcbob

  • 6 cube
  • ****
  • Posts: 261
  • Karma: -83
  • Location: Weston NSW Australia
Re: 3120 big bore kit
« Reply #59 on: August 26, 2013, 06:29:54 pm »
Well i'm sure Neil will only be too happy to fill you in on all the finer details EHP after all i'm only like Shultz I know nothing
I am a idiot so my pics disappeared.

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
290 Views
Last post May 19, 2011, 10:00:55 am
by Al Smith
6 Replies
295 Views
Last post January 24, 2012, 07:04:09 pm
by Cut4fun .
11 Replies
367 Views
Last post February 03, 2013, 06:20:16 pm
by JohnG28
0 Replies
425 Views
Last post February 04, 2013, 08:22:02 am
by Cut4fun
Husqvarna 3120

Started by Cut4fun . « 1 2 ... 8 9 » Husqvarna

82 Replies
2697 Views
Last post April 18, 2020, 07:16:47 am
by Cut4fun .
10 Replies
320 Views
Last post November 05, 2013, 10:02:57 am
by mdavlee .
10 Replies
261 Views
Last post December 13, 2013, 03:11:00 pm
by neil
27 Replies
1024 Views
Last post June 13, 2014, 08:56:31 pm
by alsled
8 Replies
283 Views
Last post March 25, 2015, 11:38:31 am
by dannyupsolate
5 Replies
319 Views
Last post January 03, 2016, 10:37:31 am
by 660magnum