Author Topic: 3120 unlimited coil source (Read 1721 times)

Cut4fun . · « **Reply #20 on:** May 12, 2016, 08:35:53 pm »

Italy made.

Has DAYED 4 on coil and designed in Italy on coil.

ITALY standard on box. Professional parts. Green box. Original quality 100%

Cut4fun . · « **Reply #21 on:** May 12, 2016, 08:36:58 pm »

I had to make alittle clearance with different location where lead ran out.

snowsalot · « **Reply #22 on:** May 16, 2016, 07:02:07 pm »

Fit perfectly except had to bend a small tab at the back of coil flat.
Didn't have to do any grinding. Saw is reving to 13000 no load. Unscrewed the short coil wire and installed the wire from the limited coil. Next step is a mild muffler mod (any suggestions) and enlarging the high speed jet in carburetor to richen it up a bit. I have seen 1.16mm as a possible size ?

Sent from my SM-G900W8 using Tapatalk

snowsalot · « **Reply #23 on:** May 16, 2016, 07:14:10 pm »

Sent from my SM-G900W8 using Tapatalk

660magnum · « **Reply #24 on:** May 16, 2016, 07:17:27 pm »

I would be conservative with enlarging the high speed jet a little bit and then see how it runs so you can ease up onto the perfect size?

If you are the ham fisted type and go too large, you can always solder it up and start over?

mdavlee . · « **Reply #25 on:** May 16, 2016, 07:23:03 pm »

You can close it off and go back if you go too far. I can't remember what step up is. 1.16mm is pretty big. I guess I could go look at mine and see what size it is.

Cut4fun . · « **Reply #26 on:** May 16, 2016, 09:03:07 pm »

Had to bend that tab on this one too.

Chainsaw Repair

News:

Author Topic: 3120 unlimited coil source (Read 1721 times)

Cut4fun .

Re: 3120 unlimited coil source

Cut4fun .

Re: 3120 unlimited coil source

snowsalot

Re: 3120 unlimited coil source

snowsalot

Re: 3120 unlimited coil source

660magnum

Re: 3120 unlimited coil source

mdavlee .

Re: 3120 unlimited coil source

Cut4fun .

Re: 3120 unlimited coil source

Related Topics