Author Topic: 345 leaking oil  (Read 941 times)

0 Members and 59 Guests are viewing this topic.

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Mobile User One year Anniversary
345 leaking oil
« on: February 10, 2014, 09:32:15 pm »
First time on the site. My problem is that my 345 Husky sweats oil out of the oil passage to the bar. I'm fairly mechanically inclined. I would like to know  where I could get a repair manual or at least a link to for this repair. I fixed a lot of saws, but never repaired an oiler problem. I'm not even sure how these oilers are supposed to operate.
Thanks, Randy

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: 345 leaking oil
« Reply #1 on: February 11, 2014, 01:37:50 am »
Look in your Gmail for a 345 Service Manual
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Mobile User One year Anniversary
Re: 345 leaking oil
« Reply #2 on: February 11, 2014, 11:22:34 am »
660, Thank you for the manual. Will be working on it today. What a help.
Randy

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: 345 leaking oil
« Reply #3 on: February 11, 2014, 11:41:22 am »
I have had a lot of people tell me that they have had the same problem in 345s, 346 both OE & NE editions. Is this something characteristic of these saws? Some sort of design issue or a systemic malady of sorts? Is there some sort of generic fix that usually cures the problem?
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Mobile User One year Anniversary
Re: 345 leaking oil
« Reply #4 on: February 11, 2014, 12:44:10 pm »
Ok-I got the pump and filter out of the saw. Everything "looks" ok, however not sure what to do next. I do have the saw pretty much stripped down due to changing fuel line. I'm just thinking getting all new parts. Thanks Killianredleo for some reassurance that I don't have a rare problem. Randy

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: 345 leaking oil
« Reply #5 on: February 11, 2014, 01:42:01 pm »
Get all new rubber and plastic parts for the pump assembly
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Mobile User One year Anniversary
Re: 345 leaking oil
« Reply #6 on: February 12, 2014, 09:56:07 am »
Thanks for the suggestion. All new parts are ordered and I will post the results.

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Mobile User One year Anniversary
Re: 345 leaking oil
« Reply #7 on: February 20, 2014, 10:02:42 pm »
Parts came in and installed. Ran the saw for a short time just to make sure the pump worked. Pump works good and the saw sat for the afternoon and "no" leak. So far so good. I would recommend replacing all the parts.

Thanks for all the advice. Great forum!
Randy

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: 345 leaking oil
« Reply #8 on: February 21, 2014, 12:27:09 am »
+1
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: 345 leaking oil
« Reply #9 on: February 21, 2014, 11:30:14 am »
As 660 said new rubber parts. I noticed that my own 346NE was drooling oil all over the place the other day. Took it apart, everything looked Kosher. However when I touched the oil delivery line to the bar it fell off the pump output. I removed the pump and the oil supply line. Cleaned them up and then tried to put them in place on the 346 metal oil pump. They would not stay where they were supposed to go, they would just fall off. Looking some more I noticed that they may be intended to be a press fit around the pump. So ordered new lines and when they arrived tried the same process with them, they fit tight to the pulp input and output. When installed in the saw the supply line goes first, then the pump then the output to the bar and it appears that all of this is held in place with the bar plate.

The pick up and delivery lines are #15 & 16 in the attach clip from the IPL, you can see how they wrap around the pump and fit onto the small inlet and outpup barbs on the pump. It looks as though there is a flange on the oil supply line that would seal the tank but the line I received did not have a flange.

I inspected the bar plate for damage and compared it to a new one, looked good. When I was installing the bar plate I could feel it compressing the rubber hoses around the pump body. Been sitting for a while now and no more drool.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

 

Related Topics

  Subject / Started by Replies Last post
16 Replies
1911 Views
Last post May 21, 2012, 05:10:04 pm
by man of stihl
7 Replies
714 Views
Last post February 14, 2013, 08:32:00 pm
by 660magnum
6 Replies
496 Views
Last post May 02, 2013, 06:43:24 pm
by Al Smith
2 Replies
1765 Views
Last post June 25, 2013, 12:51:42 pm
by Cut4fun .
2 Replies
386 Views
Last post February 25, 2014, 08:19:35 pm
by Eccentric
6 Replies
576 Views
Last post March 18, 2014, 02:14:13 pm
by eriksat1
5 Replies
762 Views
Last post November 07, 2016, 05:29:40 pm
by oldpro
11 Replies
1640 Views
Last post June 08, 2018, 05:08:23 am
by rupe
4 Replies
493 Views
Last post September 18, 2022, 06:15:57 am
by Cut4fun .
2 Replies
290 Views
Last post February 18, 2023, 07:11:44 am
by Cut4fun .