Author Topic: 346 353 drums rims etc  (Read 682 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22033
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
346 353 drums rims etc
« on: June 03, 2013, 09:34:09 pm »
Just showing you guys the set up for running the standard rims on the 346 etc saws.  That way if you wanted to run 3/8 8T 9T or .325 9T for some unknown reason you could. Otherwise it is small rim set up like on left.



Notice how lucky I got on the 346 set on right. Was running it with a missing bearing and noticed nothing odd.

http://s59.photobucket.com/user/doemaster789/media/346xpg262xp/346rimsetups003_zpsc3901e4c.jpg.html][img width=700 height=525]http://i59.photobucket.com/albums/g289/doemaster789/346xpg262xp/346rimsetups003_zpsc3901e4c.jpg
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: 346 353 drums rims etc
« Reply #1 on: June 05, 2013, 05:36:57 am »
Do you have any part numbers ?
FEAR NO TREE. FEAR GOD.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4087
  • Karma: 165
  • OHIO REDNECK
Re: 346 353 drums rims etc
« Reply #2 on: June 06, 2013, 09:36:54 am »
  357xp 359 parts.
REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 346 353 drums rims etc
« Reply #3 on: June 06, 2013, 01:45:11 pm »
Thanks for the info, but I see no reason to run anything larger than .325x8 or 3/8x7 on the 346xp - so no need for the standard (large) 7-spline drum.  ;)

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1375
  • Karma: 192
  • Location: Manitoba Canada
Re: 346 353 drums rims etc
« Reply #4 on: June 07, 2013, 12:24:40 am »
I agree with Niko, if I modified my 346XP enough to pull a 8 pin 3/8 or .325 9pin with authority............then I would have to keep on modifying and install a larger fuel tank and enlarged oil tank.
But for the cookie cutter / get together saw the stock fuel and oil tank would do. :D ;D
Making a living with a saw since age 16.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22033
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 346 353 drums rims etc
« Reply #5 on: June 07, 2013, 10:09:19 am »
Yep it was only done for guys that wanted to test  for cookie cutting times.  ;)
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 346 353 drums rims etc
« Reply #6 on: June 07, 2013, 01:32:26 pm »
Yep it was only done for guys that wanted to test  for cookie cutting times.  ;)

I can imagine that!    ;D

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 346 353 drums rims etc
« Reply #7 on: July 04, 2013, 10:18:28 pm »
Do you have any part numbers ?

Just look up the IPLs on the Husky website, under "Support". It is really simple, and the "Library" goes back to about 1972.....

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4087
  • Karma: 165
  • OHIO REDNECK
Re: 346 353 drums rims etc
« Reply #8 on: August 02, 2013, 02:42:43 pm »
Saving some info

Fits the following chainsaws:

    Husqvarna 340, 345, 346, 350, 351, 353, 357, 359, 445 and 450
    Jonsered 2141, 2145, 2149, 2150, 2151, 2152, 2156, 2159
    Replaces Part Number 503 98 00 01 and 503 88 01 71
    Fits Crankshaft Diameter .500 (1/2")
    Drive Sprocket Bearing ORF 11893
    Rim Spline Size Small 7 tooth (RSS)
    Optional Replacement Rim Pitch and Tooth Choices (sold separately)
        ORF 11892 325" x 7
        ORF 11891 325" x 8
        ORF 18720 375" x 7


    Husqvarna 357, 359
    Jonsered 2156, 2159, CS2141, CS2145, CS2149
    Replaces Part Number 503 98 00 01 and 503 88 01 71

    Note If you are converting a Husqvarna 357 or 359 from a spur system you need to purchase #503 91 27 03 oil pump drive gear. This rim & drum system has a standard 7 spline and uses RSD rims.

Fits Crankshaft Diameter .500 (1/2")
Drive Sprocket Bearing ORF 11893
Rim Spline Size Standard 7 tooth (RSD)
Optional Replacement Rim Pitch and Tooth Choices (sold separately)

    ORF 13624 .325" x 9
    ORF 68210 3/8" x 7
    ORF 22273 3/8" x 8
    ORF 22270 .404" x 7
    ORF 13313 .404" x 8



REDNECK Saw Repair

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: 346 353 drums rims etc
« Reply #9 on: August 02, 2013, 03:15:20 pm »
Thanks for the info Kevin.  If converting a 350 from spur type to rim drive, is a replacement oil pump drive gear needed (as with the 357/359)?  I've yet to pull the clutch off of any of the saws in this series, but will do so soon if I keep the 350 I'm fixing rather than sell/trade it away (as I'll swap from a spur to a rim drive system if I keep it).
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
733 Views
Last post February 07, 2018, 10:07:18 am
by Cut4fun .
1 Replies
64 Views
Last post February 01, 2015, 10:18:33 am
by Cut4fun .