« previous next »
Pages: [1]   Go Down

Author Topic: 350 oiling issues  (Read 360 times)

0 Members and 0 Guests are viewing this topic.

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2
350 oiling issues
« on: October 16, 2014, 12:58:32 pm »
I have a Husky 350 with some oiling issues. It appears to oil, however it seems that a good amount of oil ends up behind the metal plate. I ran it with the bar, chain, and cover off and there is some oil coming out of the oil port that feeds to the bar, but iI do think that some of the oil ends up behind the plate.  After reading some posts it appears that the 350 has an adjustable oiler. I'm not sure if thats and issue or not. I just tinkered with it a little last night, but now I will check into it more. I just thought I would try to get some feedback. Could someone direct me to a service manual or info regarding inspecting/repair/replace the oiler? Thanks for the help.
Randy
Logged

Share on Facebook Share on Twitter

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2106
  • Karma: 171
  • Location: MD
Re: 350 oiling issues
« Reply #1 on: October 16, 2014, 01:07:57 pm »
I would pull the cover and check and make sure that the rubber line is not tore or deformed before you start looking to buy a new pump. For the rubber line needs to seal to the metal cover. If the rubber does not seal It can leak behind the cover.
Logged
FEAR NO TREE. FEAR GOD.

Offline mnmdad

  • 3 cube
  • *
  • Posts: 5
  • Karma: 0
  • Location: Lewis County,NY
Re: 350 oiling issues
« Reply #2 on: October 16, 2014, 02:11:50 pm »
If the hose is good take a file to the pump piston and increase the angle on it I have done this many times 8)
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 350 oiling issues
« Reply #3 on: October 16, 2014, 02:21:24 pm »
Make sure the bar oiler holes and the chain grooves are  clean of wood chips and dirt.

Also that the oiler hole of the bar aligns with the oiler slot on the chain saw.

Also some newer bars have a 3/32" angled oiler hole instead of the 5/32" oiler holes.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Randy

  • 4 cube
  • **
  • Posts: 31
  • Karma: 2
Re: 350 oiling issues
« Reply #4 on: October 16, 2014, 06:56:46 pm »
Thanks guys for all the input. I will check out these options.
Randy
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
3 Replies
258 Views 		Last post November 23, 2013, 04:53:27 pm
by loubell
85 Replies
5604 Views 		Last post November 03, 2014, 11:12:00 am
by 3000 FPS
11 Replies
663 Views 		Last post March 16, 2014, 05:11:50 pm
by 660magnum
12 Replies
1018 Views 		Last post March 23, 2014, 10:53:39 pm
by nyquil junkie
4 Replies
381 Views 		Last post March 29, 2014, 11:11:59 am
by bustedknuckles
13 Replies
678 Views 		Last post March 14, 2016, 09:11:34 am
by ChipsAhoy
11 Replies
1487 Views 		Last post April 30, 2016, 10:55:00 am
by Takoateli
6 Replies
991 Views 		Last post November 16, 2016, 01:09:22 pm
by Cut4fun .
3 Replies
342 Views 		Last post April 26, 2017, 07:00:06 am
by Jacks54
3 Replies
312 Views 		Last post November 08, 2017, 11:05:17 pm
by super44