Author Topic: Husqvarna 362xp  (Read 3327 times)

0 Members and 0 Guests are viewing this topic.

Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29
Re: 362xp
« Reply #20 on: December 11, 2011, 08:20:17 am »
Cale IMO if you are expecting 365 special performance from the 362xp you will be disappointed. The 362xp runs great but lacks the torque of 365SP with the quad transfers. 362 is a rpm saw IMO.
My PP415 just handed it to the 362 in back to back cuts with 2 of us running them. I never did compare my PP415 to my best running 365SP though. To late now too, gone gone.  :P

I've got 100$ into the saw saw so far, and even with the clutch cover and new top handle I'll have about 150$
into the saw. So there's plenty of room left to remedy that performance problem.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 362xp
« Reply #21 on: December 11, 2011, 01:24:37 pm »
Cale IMO if you are expecting 365 special performance from the 362xp you will be disappointed. The 362xp runs great but lacks the torque of 365SP with the quad transfers. 362 is a rpm saw IMO.

I've got 100$ into the saw saw so far, and even with the clutch cover and new top handle I'll have about 150$
into the saw. So there's plenty of room left to remedy that performance problem.

I was just giving you a heads up. All that talk at the pa gtg we were at got me wanting to put one together to find out IF they ran as good as said.
Shoot I got more then that in mine with just the oem crank kit.  I built it one piece at a time like that caddy song  starting with 2 crankcase halves  ;D
REDNECK Saw Repair Getter Done

Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29
Re: 362xp
« Reply #22 on: December 11, 2011, 06:52:29 pm »
Damn screwy bar length on this thing 70 drive links.


Cleaned up and running, had to change the gas cap, it leaked awful.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 362xp
« Reply #23 on: December 11, 2011, 07:01:32 pm »
Well if you really start hating the 70dl bar and want to find yourself a 72dl one. I will trade you this 16" 3/8 050 60dl stihl mount bar for the 70dl one.

REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 362xp
« Reply #24 on: December 11, 2011, 07:36:57 pm »
Blood; Most K095/small Husky 20" 3/8" bars are 72dl.

I also noticed that you had a newer green gas cap on it in another picture, that doesn't really look good on it.   ;D

The 372xp case is not exactly the same - and of course not the clutch cover (front vs. side adjuster), or anything that has to do with the bar mount.

Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29
Re: 362xp
« Reply #25 on: December 11, 2011, 08:06:37 pm »
I'm thinking someone at my distributor screwed up and sent me the wrong bar.

I'll have to check the part number when i get to shop tomorrow.

Troll that's why I got a 20" for it instead of a 18" since I have a ton of 72dl chains

That green cap was the only one I had sitting around the shop that would work.

I agree it looks doesn't look good.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 362xp
« Reply #26 on: December 11, 2011, 08:22:09 pm »
I dont know how to read what is what bar mount with their codes. But they show 70dl and 72dl but I dont know if one is small mount, one large mount etc.  ???

http://www.windsorforestry.com/pdfs/bars/bar_SpeedTip.pdf
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 362xp
« Reply #27 on: December 14, 2011, 06:04:17 am »
Husky lists 72dl for both the small and large mount 20" 3/8" bars currently, but 70dl bars surely exist - I think 70dl was more common some time in the past, but those bars aren't really 20", closer to 19"....

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: 362xp
« Reply #28 on: December 14, 2011, 12:05:55 pm »

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4085
  • Karma: 165
  • OHIO REDNECK
Re: 362xp
« Reply #29 on: January 01, 2012, 01:14:12 pm »
Couldnt remember if I ever posted pics of the completed 362xp project with new oem clutch cover for small mount and front tensioner and
362xp recoil decal.




REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
12 Replies
623 Views
Last post February 11, 2013, 04:22:19 pm
by Cut4fun
25 Replies
3950 Views
Last post February 03, 2013, 01:45:30 pm
by Cut4fun .
3 Replies
690 Views
Last post July 24, 2012, 09:40:25 pm
by 660magnum
5 Replies
996 Views
Last post July 27, 2012, 01:55:10 pm
by Cut4fun .
91 Replies
4532 Views
Last post December 18, 2016, 12:54:06 pm
by Cut4fun .
5 Replies
166 Views
Last post December 14, 2013, 01:27:33 pm
by J.Walker
8 Replies
267 Views
Last post December 28, 2013, 09:34:45 am
by SawTroll
55 Replies
1077 Views
Last post June 10, 2014, 10:30:43 am
by KilliansRedLeo
4 Replies
281 Views
Last post July 12, 2014, 05:55:01 pm
by KilliansRedLeo
15 Replies
408 Views
Last post September 07, 2015, 06:40:03 pm
by Cut4fun .