Author Topic: 365 XT Tuning Video  (Read 214 times)

0 Members and 0 Guests are viewing this topic.

Offline middleagedmutant

  • 3 cube
  • *
  • Posts: 9
  • Karma: 1
365 XT Tuning Video
« on: April 20, 2014, 11:59:11 am »
I took the saw out and made a video with my brother to see if you guys can give me hand I did fatten it up so now the max is at 13250 RPM. https://www.youtube.com/watch?v=kld3UGZr8Cw&feature=youtu.be

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 365 XT Tuning Video
« Reply #1 on: April 20, 2014, 12:19:46 pm »
Fix your video for ya.

http://youtu.be/kld3UGZr8Cw
REDNECK Saw Repair Getter Done

Offline middleagedmutant

  • 3 cube
  • *
  • Posts: 9
  • Karma: 1
Re: 365 XT Tuning Video
« Reply #2 on: April 20, 2014, 12:22:32 pm »
Thanks

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 365 XT Tuning Video
« Reply #3 on: April 20, 2014, 12:26:36 pm »
She sounded good at 14.5K.  What did the plug show? 

I still for everyday cutting fatten up to 4 stroke and clear up in cut.

My PP 375 could go to the moon cookie cutting safely, but for work loads I stayed on safe side. Fat rich, clear up in cut.

How she sound and feel in the cuts at 13.25K? 

REDNECK Saw Repair Getter Done

Offline middleagedmutant

  • 3 cube
  • *
  • Posts: 9
  • Karma: 1
Re: 365 XT Tuning Video
« Reply #4 on: April 20, 2014, 05:15:03 pm »
The saw  sounds good at 13250RPM, although 14500RPM just seems a little to high for firewood. Plugs aren't white so mustn't  be a lean mix. Running it rich at 13250RPM with a  32-1 on the mix ratio. Idle speed  is at about 2800-3000RPM. The chain is set to be stationary at idle and sanded the oil pump`s seam . Running good will try out next weekend with follow up video.Thanks

Offline rms61moparman

  • 6 cube
  • ****
  • Posts: 270
  • Karma: 37
  • Location: Franklinton, Kentucky
Re: 365 XT Tuning Video
« Reply #5 on: April 20, 2014, 08:02:40 pm »
Was the chain on backwards???


Mike

Offline middleagedmutant

  • 3 cube
  • *
  • Posts: 9
  • Karma: 1
Re: 365 XT Tuning Video
« Reply #6 on: April 20, 2014, 08:26:31 pm »
Negative  maybe needs a little more sharpening I did touch it up.

Offline rms61moparman

  • 6 cube
  • ****
  • Posts: 270
  • Karma: 37
  • Location: Franklinton, Kentucky
Re: 365 XT Tuning Video
« Reply #7 on: April 21, 2014, 09:42:26 pm »
The saw seems to be running great!
A bit too much raker still on that chain though.
I believe if you drop them down a bit you will find that saw is a good one.


Mike

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
948 Views
Last post March 03, 2011, 08:53:49 pm
by jamming
Tuning a saw

Started by 05_sprcrw « 1 2 3 » Husqvarna

25 Replies
1336 Views
Last post May 04, 2011, 12:45:06 pm
by 05_sprcrw
3 Replies
1279 Views
Last post August 22, 2012, 07:06:45 pm
by AussieRedGum
11 Replies
175 Views
Last post February 28, 2014, 03:14:46 pm
by Cut4fun
15 Replies
355 Views
Last post April 04, 2014, 11:17:57 pm
by Reddog
23 Replies
231 Views
Last post April 17, 2014, 04:37:58 am
by KilliansRedLeo
3 Replies
132 Views
Last post August 02, 2014, 06:57:23 pm
by Cut4fun .
4 Replies
246 Views
Last post September 18, 2014, 01:47:38 pm
by pigpen60
1 Replies
239 Views
Last post December 11, 2014, 01:29:35 pm
by 660magnum
5 Replies
109 Views
Last post January 29, 2015, 07:50:15 pm
by 3000 FPS