« previous next »
Pages: 1 ... 5 6 7 8 9 [10] 11   Go Down

Author Topic: 371xp not running  (Read 2167 times)

0 Members and 0 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 371xp not running
« Reply #90 on: March 02, 2014, 05:16:29 pm »
Someone else removed these, I got them in a horse trade. He may have received them in a horse trade also?

The holes go all the way through into the muffler area.

You can make up a drill rod or piano wire driver and tap the drive screws out from the muffler cavity after you remove the muffler.

Be careful and save the pins. They are available at some hardware stores or McMaster-Carr but you don't need the trouble.

I once bought a brand new looking 357XP from the local dealer knowing that it had a new case from a crushing accident. A week or so later I discovered there's no serial tag on it. Nice chainsaw though.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 371xp not running
« Reply #91 on: March 02, 2014, 05:37:15 pm »
As far as the little container of tags goes. One of my customers is a large commercial tree service. Who routinely remove the serial number tags from all fully depreciated equipment before disposal and save them. They do this in case of IRS audit they can prove that they actually owned the equipment. Removed tags are a lot easier to store than the equipment itself.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 371xp not running
« Reply #92 on: March 03, 2014, 11:40:24 am »
No Joy! Parts are still in PA! Perhaps tomorrow?
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline looking4firewood

  • 4 cube
  • **
  • Posts: 26
  • Karma: 2
Re: 371xp not running
« Reply #93 on: March 03, 2014, 04:06:54 pm »
Just had some 4' in diameter red oak logs delivered, looking forward to seeing what this machine is going to do.
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 371xp not running
« Reply #94 on: March 03, 2014, 06:35:24 pm »
Tom, the high here today was 7° and we have another big storm coming through so when I tune the saw it will be in very cold weather, so you may have to re-tune the saw right out of the box!
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 371xp not running
« Reply #95 on: March 04, 2014, 07:49:47 pm »
Tuesday, 4 March 2014, no parts again today! So I checked and found out that; in an effort to keep costs to a minimum I obviously chose the least cost shipping option. Which resulted in a 7-10 day shipping time. My sincere apologies! 
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline looking4firewood

  • 4 cube
  • **
  • Posts: 26
  • Karma: 2
Re: 371xp not running
« Reply #96 on: March 05, 2014, 07:25:39 am »
Tim, no big deal, I'll send you an email.
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 371xp not running
« Reply #97 on: March 05, 2014, 12:36:57 pm »
Stuff finally showed up today! Whoo hoooo, will be back to work on the saw in the AM!
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4671
  • Karma: 316
  • Location: Carpenter, Wyoming
Re: 371xp not running
« Reply #98 on: March 05, 2014, 12:58:50 pm »
Quote from: KilliansRedLeo on March 05, 2014, 12:36:57 pm
Stuff finally showed up today! Whoo hoooo, will be back to work on the saw in the AM!

All right I want to see this thing run.
Logged
PP 505, 475, 445.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 371xp not running
« Reply #99 on: March 05, 2014, 01:04:55 pm »
Quote from: 3000 FPS on March 05, 2014, 12:58:50 pm
Quote from: KilliansRedLeo on March 05, 2014, 12:36:57 pm
Stuff finally showed up today! Whoo hoooo, will be back to work on the saw in the AM!

All right I want to see this thing run.

Me too!
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826
Pages: 1 ... 5 6 7 8 9 [10] 11   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
5 Replies
482 Views 		Last post November 18, 2012, 10:50:17 am
by Cut4fun .
5 Replies
792 Views 		Last post January 02, 2013, 08:23:58 am
by William Greene
6 Replies
1537 Views 		Last post June 02, 2013, 09:30:02 pm
by brokenbudget
28 Replies
1117 Views 		Last post August 11, 2013, 03:46:32 pm
by brokenbudget
5 Replies
374 Views 		Last post October 03, 2013, 11:51:34 am
by 660magnum
8 Replies
1134 Views 		Last post November 12, 2013, 08:11:36 pm
by Cut4fun .
17 Replies
1260 Views 		Last post November 25, 2013, 01:09:47 pm
by crankincraig
2 Replies
482 Views 		Last post April 23, 2014, 06:31:10 pm
by Jason K
16 Replies
630 Views 		Last post May 02, 2014, 09:50:35 am
by KilliansRedLeo
4 Replies
326 Views 		Last post June 20, 2014, 09:24:30 am
by Fish