Author Topic: 394 Rebuild and BB (Read 870 times)

alsled · « **Reply #20 on:** January 22, 2014, 02:52:54 pm »

As far as filling it in, there's parts missing here. Called the local weld shop on that rod. 125$ a pound, 10 lb minimum to order. I hate that place,,,,,,,

660magnum · « **Reply #21 on:** January 22, 2014, 03:20:04 pm »

10 pounds of magnesium rod should be quite a few rods because it is so light weight?

alsled · « **Reply #22 on:** January 22, 2014, 07:07:37 pm »

What i did was burn the powder coat off a old 55 case, then I wire brushed it, then I cut it into strips, theres the filler rod. Filled in a stripped hole, drilled and taped it, all good, theres 3 other cracks to take care of next.

KilliansRedLeo · « **Reply #23 on:** January 22, 2014, 07:18:27 pm »

Alan that is the coolest craftsmanship and most inventive technique I have seen in quite some time! +3!

alsled · « **Reply #24 on:** January 22, 2014, 07:30:10 pm »

Tim, if the real filler rod wasn't $125 a lb I'd buy some at a decent price... Did some research and 4043 al filler rod is said to work on mag, I may try it on a part of the 55 and see what happens.

KilliansRedLeo · « **Reply #25 on:** January 22, 2014, 07:52:50 pm »

Cool, I have a whole bunch of cases and cylinders that i was going o put in the scrap metal bin. Next time you are around you can have a look and any thing you think is worth fixing, you can have. In the future you will be doing ALL of my light metal welding!

alsled · « **Reply #26 on:** January 22, 2014, 07:54:21 pm »

Never throw that stuff out,, as soon as you do, you need it.

KilliansRedLeo · « **Reply #27 on:** January 22, 2014, 08:25:21 pm »

NO CHIT, but now I have someone (AlSled) that can repair it!

alsled · « **Reply #28 on:** January 24, 2014, 07:35:59 pm »

There are 3 areas that have cracks here, I cut a piece of a 55 case, the strip you see, and welded it on with other pieces of a 55, not pretty, but came out well in the end, the last pic is Sat. fix. Its a work saw, not a show saw, so I'm happy.
I also find welding mag. easier then aluminum.

aclarke · « **Reply #29 on:** January 24, 2014, 08:54:36 pm »

Tig depot sells az92 in 1/2 lb increments $60

Chainsaw Repair

News:

Author Topic: 394 Rebuild and BB (Read 870 times)

alsled

Re: 394 Rebuild and BB

660magnum

Re: 394 Rebuild and BB

alsled

Re: 394 Rebuild and BB

KilliansRedLeo

Re: 394 Rebuild and BB

alsled

Re: 394 Rebuild and BB

KilliansRedLeo

Re: 394 Rebuild and BB

alsled

Re: 394 Rebuild and BB

KilliansRedLeo

Re: 394 Rebuild and BB

alsled

Re: 394 Rebuild and BB

aclarke

Re: 394 Rebuild and BB

Related Topics