Author Topic: husqvarna 394xp Rebuild (Read 2052 times)

05_sprcrw · « **Reply #20 on:** January 21, 2014, 02:28:00 pm »

I lost some info on my computer a while back and forgot I had signed up on here. I thought I should throw a little update in here, and say that the saw is still running great with no issues. Those cheap $3.25 bearings I put in from vbx are holding up great and I have since been buying more bearings from them with no issues at all. I would highly recommend them to anyone using them. Sorry the porting pics got deleted somehow I will try and track them down again.

JohnG28 · « **Reply #21 on:** January 21, 2014, 03:58:19 pm »

Good to hear. I hope you get your pics back in, I'm doing my first port project and could use some visual info. Great thread!

KilliansRedLeo · « **Reply #22 on:** January 26, 2014, 10:18:49 pm »

Instead of emery paper try diamond paste. Cuts VERY fast, so be careful. Also you have to have a HARD surface to lap on.

Chainsaw Repair

News:

Author Topic: husqvarna 394xp Rebuild (Read 2052 times)

05_sprcrw

Re: husqvarna 394xp Rebuild

JohnG28

Re: husqvarna 394xp Rebuild

KilliansRedLeo

Re: husqvarna 394xp Rebuild

Related Topics