Author Topic: 395XP clutch drum.  (Read 242 times)

0 Members and 0 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
395XP clutch drum.
« on: April 01, 2016, 08:18:12 pm »
I worked on a brand new Husqvarna 395XP today.   The customer bought it from a well known company and had a Oregon clutch drum and .404 rim put on it.    He brought it in to where I work for warranty work from Husqvarna because it would not start.    After finding out the clutch drum and clutch would not spin free from each other I took it all off and the saw started just fine.    Someone did some weird stuff on this clutch drum and the clutch drum itself does not seem to go on all the way causing the clutch to bind up on it when it was screwed on.

So I looked at the IPL and is shows no rubber seal or washer pressed on that way on the back of the clutch drum.   Mind you now this work was done by a reputable big company and the saw is brand new never been run.

This is a Oregon clutch drum and it seems to be to long where it goes into the oiler and then the clutch itself will bind up on the drum when threading it on.    Anyone ever seen this before with a Oregon clutch drum.   This is some crazy work here that someone did.
PP 505, 475, 445.

Share on Facebook Share on Twitter


Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: 395XP clutch drum.
« Reply #1 on: April 01, 2016, 10:41:37 pm »
Is there a washer under the oiler drive gear?

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: 395XP clutch drum.
« Reply #2 on: April 01, 2016, 11:06:39 pm »
Is there a washer under the oiler drive gear?

That is a good question.   I had the worm gear out of it and did not see a washer there.   Something weird like that going on with it though.
Also the worm gear looked like it was in all the way and flush with the oiler like it should be.   
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21880
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 395XP clutch drum.
« Reply #3 on: April 02, 2016, 12:59:40 pm »
husqvarna 395 IPL  http://s30387.gridserver.com/partsDiagrams/Husqvarna%20395.pdf

Was wanting to see how the end of worm geared was made in IPL. Was thinking somebody rednecked the area there to take up the space.


REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: 395XP clutch drum.
« Reply #4 on: April 02, 2016, 08:55:15 pm »
husqvarna 395 IPL  http://s30387.gridserver.com/partsDiagrams/Husqvarna%20395.pdf

Was wanting to see how the end of worm geared was made in IPL. Was thinking somebody rednecked the area there to take up the space.





That pretty much looks like the worm gear that was on the saw.     Unfortunately I may never find out what was wrong because the customer will probably send it back to where in purchased it from.   
PP 505, 475, 445.

Online srcarr52

  • 6 cube
  • ****
  • Posts: 288
  • Karma: 93
  • Location: IA
Re: 395XP clutch drum.
« Reply #5 on: April 04, 2016, 10:51:28 am »
The same clutch drum is also used on the 298/1100/2100/2101 and 181/281/288 series saws where the plastic guard and rubber seal are used to seal the pump worm drive from debris. The 394/395 has a different pump and drive gear design that has the debris guard integrated into the worm gear so the extra pieces that come with the clutch drum can be discarded. 
Informative Informative x 3 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: 395XP clutch drum.
« Reply #6 on: April 04, 2016, 10:59:20 am »
The same clutch drum is also used on the 298/1100/2100/2101 and 181/281/288 series saws where the plastic guard and rubber seal are used to seal the pump worm drive from debris. The 394/395 has a different pump and drive gear design that has the debris guard integrated into the worm gear so the extra pieces that come with the clutch drum can be discarded. 

Ok that explains why they are on there.   Someone did not realize on the 395 that you have to eliminate those parts.    Is the worm gear also a different width from the 395XP compared to the others.   It seemed like the clutch drum was jammed up against the worm gear not allowing it to spin free.
PP 505, 475, 445.

Online srcarr52

  • 6 cube
  • ****
  • Posts: 288
  • Karma: 93
  • Location: IA
Re: 395XP clutch drum.
« Reply #7 on: April 04, 2016, 11:30:56 am »
I just remembered that the older 2100 and 288 series can be updated to the 394/395 style worm gear.

Original 2100 or 288 style worm gear.


Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
420 Views
Last post April 14, 2011, 03:57:40 pm
by Cut4fun .
13 Replies
1000 Views
Last post February 25, 2012, 10:21:18 pm
by Cut4fun .
6 Replies
669 Views
Last post August 20, 2013, 02:27:58 pm
by 660magnum
8 Replies
316 Views
Last post January 30, 2013, 09:42:44 am
by Spike60
2 Replies
349 Views
Last post November 18, 2013, 08:45:26 pm
by rayvil01
2 Replies
333 Views
Last post June 20, 2014, 01:31:49 pm
by CASE5854x4
18 Replies
435 Views
Last post July 27, 2015, 02:48:45 pm
by John Mc
2 Replies
133 Views
Last post December 28, 2015, 12:46:37 pm
by Majorpayne
2 Replies
141 Views
Last post January 20, 2017, 12:26:58 am
by pete
2 Replies
72 Views
Last post February 04, 2018, 05:07:10 pm
by Cut4fun .