Author Topic: 450e Husqvarna Fuel line  (Read 639 times)

0 Members and 0 Guests are viewing this topic.

Offline ldrotos

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
450e Husqvarna Fuel line
« on: January 05, 2013, 01:13:51 pm »
I am new to the forum and I have read alot of information on chainsaws. I have a 450e Husqvarna runing low grade unleaded fuel in the saw. Its been runing crappie. I am going to change out the fuel line attached to the filter. The question,I have the replacement OEM fuel line looks different than the line that is currently installed in the 450e saw. There are two lines on the right side of the carburator the front line looks to be the line to replace because of the length and the rear line appears to be the return fuel line? What is the best approach to install the new replacement line with minimal problems?  Advice greatly appreciated. Thanks.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22115
  • Karma: 550
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 450e Husqvarna Fuel line
« Reply #1 on: January 05, 2013, 07:55:11 pm »
Sorry never been in one to date. 

Husqvarna  450 450e   IPL  http://m.husqvarna.com/ddoc/HUSI/HUSI2011_AAaa/HUSI2011_AAaa__55.pdf
REDNECK Saw Repair Getter Done

Offline HusqvarnaRulez

  • 3 cube
  • *
  • Posts: 14
  • Karma: 1
Re: 450e Husqvarna Fuel line
« Reply #2 on: January 06, 2013, 12:10:19 am »
The original part number for the line is 544 12 86-01 it changed to 523 05 52-01, this is a formed line.  Do not use the old style line.

The easiest way is remove screws from tank but you do not need to remove the tank just get it down about an inch or so.

There was a change on the original line, a problem with it kinking the new line is made just a bit different, takes less than 15 mins to replace the line.

Offline ldrotos

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: 450e Husqvarna Fuel line
« Reply #3 on: January 06, 2013, 09:35:22 am »
appreciate information.Thanks!! 8) 

Offline ldrotos

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: 450e Husqvarna Fuel line
« Reply #4 on: January 06, 2013, 09:56:15 am »
Sorry never been in one to date. 

Husqvarna  450 450e   IPL  http://m.husqvarna.com/ddoc/HUSI/HUSI2011_AAaa/HUSI2011_AAaa__55.pdf
Thanks for the Husqvarna 450e web site.I have downloaded and printed the manual. Information much appreciated!!

Offline ldrotos

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: 450e Husqvarna Fuel line
« Reply #5 on: January 11, 2013, 04:28:56 pm »
Where aew wthe bolts located to drop the tank down an inch, on the bottom ?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22115
  • Karma: 550
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 450e Husqvarna Fuel line
« Reply #6 on: January 11, 2013, 05:01:34 pm »
page 24-26 show mounts on the IPL
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
18 Replies
4351 Views
Last post March 26, 2017, 05:46:32 pm
by Cut4fun .
2 Replies
427 Views
Last post March 28, 2012, 12:27:35 pm
by nmurph
11 Replies
877 Views
Last post October 30, 2016, 09:16:26 am
by Sty57
9 Replies
306 Views
Last post November 17, 2017, 08:22:36 am
by Cut4fun .
2 Replies
389 Views
Last post August 26, 2013, 01:39:22 pm
by Bluegill
9 Replies
1535 Views
Last post April 18, 2014, 01:04:51 am
by Phillip Guidry
38 Replies
714 Views
Last post November 30, 2015, 03:40:50 pm
by dynodave
15 Replies
1700 Views
Last post April 30, 2014, 11:58:07 pm
by Eccentric
3 Replies
326 Views
Last post July 20, 2014, 06:32:40 pm
by 660magnum
2 Replies
421 Views
Last post August 05, 2014, 11:05:08 pm
by farmboy