Author Topic: Husqvarna 562xp autotune  (Read 7077 times)

0 Members and 0 Guests are viewing this topic.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Husqvarna 562xp autotune
« on: July 30, 2014, 09:04:24 pm »
Lost the ring keeper pin let the ring spin around and caught the exhaust port and wasted the piston and cylinder.
FEAR NO TREE. FEAR GOD.

Share on Facebook Share on Twitter


Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: 562 Xp auto tune
« Reply #1 on: July 30, 2014, 09:05:09 pm »
FEAR NO TREE. FEAR GOD.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: 562 Xp auto tune
« Reply #2 on: July 30, 2014, 09:05:37 pm »
FEAR NO TREE. FEAR GOD.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: 562 Xp auto tune
« Reply #3 on: July 30, 2014, 09:08:30 pm »
The hole is egged out well the pin just falls out. What are some thoughts as to what happen to cause the pin to come loose? Have never seen one do that. And does any one have a good source for a oem piston and cylinder.
FEAR NO TREE. FEAR GOD.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 562 Xp auto tune
« Reply #4 on: July 30, 2014, 10:40:27 pm »
Spike60 can get you a new C/P. Is the saw still in warranty? That is a DEFECTIVE piston, should be covered under warranty!
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: 562 Xp auto tune
« Reply #5 on: July 30, 2014, 10:55:30 pm »
The saw is a 2011 don't think there is any left. Any other things that would cause the pin to come loose like that. I have a stihl 361 from the same guy the had the top ring pin push back in to the piston and rotated around and caught the transfer. The p/c is aftermarket on the stihl. So not a big surprise to find something out of place there. Still would like to know what can cause it to happen or is it just a faulty piston from the factory.
FEAR NO TREE. FEAR GOD.

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: 562 Xp auto tune
« Reply #6 on: July 31, 2014, 08:42:38 am »
It's a common issue on the 562, has been happening to a lot of people.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 562 Xp auto tune
« Reply #7 on: July 31, 2014, 11:09:48 am »
Is the C/P from Mahle? Just curious.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: 562 Xp auto tune
« Reply #8 on: July 31, 2014, 01:59:49 pm »
Quote
It's a common issue on the 562, has been happening to a lot of people.

First I've heard of this and I spend way too much time on several chainsaw sites...

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: 562 Xp auto tune
« Reply #9 on: July 31, 2014, 02:10:03 pm »
Today is the first I've heard of it.  Stopped by AS and heard it now here.  Bothers me as I recently got a 562.
Shep

 

Related Topics

  Subject / Started by Replies Last post
30 Replies
6465 Views
Last post February 18, 2012, 09:03:13 pm
by mdavlee
12 Replies
1025 Views
Last post November 21, 2018, 07:50:06 am
by Cut4fun .
48 Replies
5399 Views
Last post January 26, 2013, 05:48:22 pm
by brokenbudget
10 Replies
667 Views
Last post January 12, 2013, 06:22:17 pm
by don5477
10 Replies
254 Views
Last post March 12, 2014, 11:07:39 pm
by HolmenTree
10 Replies
327 Views
Last post March 14, 2014, 04:20:36 am
by SawTroll
6 Replies
323 Views
Last post August 28, 2014, 10:49:11 pm
by Skippysphins
18 Replies
457 Views
Last post November 24, 2015, 10:24:58 am
by SawTroll
0 Replies
131 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
6 Replies
622 Views
Last post May 25, 2018, 09:29:05 am
by Carpenter Mark