Author Topic: Husqvarna 562xp autotune  (Read 7011 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562 Xp auto tune
« Reply #40 on: August 02, 2014, 10:29:30 am »
I'm keeping a ported 357xp around, but would rather run the stock 562xp, as it cuts faster. I ain't worried at all.  ;D

At husky dealer I tested 357xp with 20" and 562xp with 20" both filled up ready to use. I couldnt tell abit of difference in the weight of either.  Felt the same.

I liked 3/8 on my 357. new CL pretty dang dull off the reel.

http://youtu.be/IZJeepcpaN8
REDNECK Saw Repair Getter Done

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: 562 Xp auto tune
« Reply #41 on: August 02, 2014, 12:29:13 pm »
My WP359's have a "HOME"!
Still don't understand the piston issue some areas major problems other areas none.  I'm serious here could oil ratio be a contributing factor?  I know EHP runs 32:1.  It just doesn't make sense.
Shep

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 562 Xp auto tune
« Reply #42 on: August 02, 2014, 01:03:07 pm »
Bill, not sure I understand your question. However I run 32:1 in all my personal saws also.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: 562 Xp auto tune
« Reply #43 on: August 02, 2014, 01:25:55 pm »
So a stock 562 is faster than a ported 357???
Ron

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: 562 Xp auto tune
« Reply #44 on: August 02, 2014, 01:39:09 pm »
So a stock 562 is faster than a ported 357???
Not where I live.

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: 562 Xp auto tune
« Reply #45 on: August 02, 2014, 04:18:48 pm »
Quote
So a stock 562 is faster than a ported 357???

I ported my 357 and it's a keeper! But my stock muff modded 562 is a little faster. I've been thinking of sending the 357 to Mitch and have him do it up right. But I'm happy with how both saws run as they are.

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: 562 Xp auto tune
« Reply #46 on: August 02, 2014, 04:25:15 pm »
Quote
At husky dealer I tested 357xp with 20" and 562xp with 20" both filled up ready to use. I couldnt tell abit of difference in the weight of either.  Felt the same.

I liked 3/8 on my 357. new CL pretty dang dull off the reel.

Not much diff in weight at all. the 555 feels a bit lightersmaller though.

That 357 is cuttin very nice man!

Offline Playinwood

  • 6 cube
  • ****
  • Posts: 246
  • Karma: 5
Re: 562 Xp auto tune
« Reply #47 on: August 02, 2014, 05:42:14 pm »
yup...every where except where Art lives

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: 562 Xp auto tune
« Reply #48 on: August 02, 2014, 05:49:52 pm »
yup...every where except where Art lives

Your right Jeff, and your old 2159 won the 0-60 class at the EX today. Second place?  ;)

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2046
  • Karma: 156
  • Location: MD
Re: 562 Xp auto tune
« Reply #49 on: August 02, 2014, 09:09:41 pm »
I can say for sure the saw that I am working on the guy runs 50:1. And his guys abuse his saws. Most always come back with cooked cylinders. I would have to say that if there are not a lot of guys seeing ring locator pin issues or just in some areas would have to say it has to do with the end operator and his fuel mix. Unless the auto tune gets screwy in certain areas, but I doubt it. Need to have the talk with him about at least running 40:1 from now on and hope his failure rate goes down.
FEAR NO TREE. FEAR GOD.

 

Related Topics

  Subject / Started by Replies Last post
30 Replies
6420 Views
Last post February 18, 2012, 09:03:13 pm
by mdavlee
12 Replies
1013 Views
Last post November 21, 2018, 07:50:06 am
by Cut4fun .
48 Replies
5385 Views
Last post January 26, 2013, 05:48:22 pm
by brokenbudget
10 Replies
661 Views
Last post January 12, 2013, 06:22:17 pm
by don5477
10 Replies
252 Views
Last post March 12, 2014, 11:07:39 pm
by HolmenTree
10 Replies
322 Views
Last post March 14, 2014, 04:20:36 am
by SawTroll
6 Replies
316 Views
Last post August 28, 2014, 10:49:11 pm
by Skippysphins
18 Replies
436 Views
Last post November 24, 2015, 10:24:58 am
by SawTroll
0 Replies
123 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
6 Replies
525 Views
Last post May 25, 2018, 09:29:05 am
by Carpenter Mark