Author Topic: Husqvarna 562xp autotune  (Read 12354 times)

0 Members and 51 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: 562 Xp auto tune
« Reply #40 on: August 02, 2014, 10:29:30 am »
I'm keeping a ported 357xp around, but would rather run the stock 562xp, as it cuts faster. I ain't worried at all.  ;D

At husky dealer I tested 357xp with 20" and 562xp with 20" both filled up ready to use. I couldnt tell abit of difference in the weight of either.  Felt the same.

I liked 3/8 on my 357. new CL pretty dang dull off the reel.


Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC

  • Total Badges: 31
    Badges: (View All)
    Level 6 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary 1000 Posts Old Browser
Re: 562 Xp auto tune
« Reply #41 on: August 02, 2014, 12:29:13 pm »
My WP359's have a "HOME"!
Still don't understand the piston issue some areas major problems other areas none.  I'm serious here could oil ratio be a contributing factor?  I know EHP runs 32:1.  It just doesn't make sense.
Shep

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: 562 Xp auto tune
« Reply #42 on: August 02, 2014, 01:03:07 pm »
Bill, not sure I understand your question. However I run 32:1 in all my personal saws also.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: 562 Xp auto tune
« Reply #43 on: August 02, 2014, 01:25:55 pm »
So a stock 562 is faster than a ported 357???
Ron

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1134
  • Karma: 82

  • Total Badges: 31
    Badges: (View All)
    Level 6 Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: 562 Xp auto tune
« Reply #44 on: August 02, 2014, 01:39:09 pm »
So a stock 562 is faster than a ported 357???
Not where I live.

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22

  • Total Badges: 21
    Badges: (View All)
    Level 5 Third year Anniversary Second year Anniversary Avatar Topic Starter Level 4
Re: 562 Xp auto tune
« Reply #45 on: August 02, 2014, 04:18:48 pm »
Quote
So a stock 562 is faster than a ported 357???

I ported my 357 and it's a keeper! But my stock muff modded 562 is a little faster. I've been thinking of sending the 357 to Mitch and have him do it up right. But I'm happy with how both saws run as they are.

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22

  • Total Badges: 21
    Badges: (View All)
    Level 5 Third year Anniversary Second year Anniversary Avatar Topic Starter Level 4
Re: 562 Xp auto tune
« Reply #46 on: August 02, 2014, 04:25:15 pm »
Quote
At husky dealer I tested 357xp with 20" and 562xp with 20" both filled up ready to use. I couldnt tell abit of difference in the weight of either.  Felt the same.

I liked 3/8 on my 357. new CL pretty dang dull off the reel.

Not much diff in weight at all. the 555 feels a bit lightersmaller though.

That 357 is cuttin very nice man!

Offline Playinwood

  • 6 cube
  • ****
  • Posts: 246
  • Karma: 5

  • Total Badges: 17
    Badges: (View All)
    Fourth year Anniversary Level 4 Third year Anniversary Second year Anniversary Karma 100 Posts
Re: 562 Xp auto tune
« Reply #47 on: August 02, 2014, 05:42:14 pm »
yup...every where except where Art lives

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1134
  • Karma: 82

  • Total Badges: 31
    Badges: (View All)
    Level 6 Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: 562 Xp auto tune
« Reply #48 on: August 02, 2014, 05:49:52 pm »
yup...every where except where Art lives

Your right Jeff, and your old 2159 won the 0-60 class at the EX today. Second place?  ;)

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2106
  • Karma: 171
  • Location: MD

  • Total Badges: 36
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Level 6
Re: 562 Xp auto tune
« Reply #49 on: August 02, 2014, 09:09:41 pm »
I can say for sure the saw that I am working on the guy runs 50:1. And his guys abuse his saws. Most always come back with cooked cylinders. I would have to say that if there are not a lot of guys seeing ring locator pin issues or just in some areas would have to say it has to do with the end operator and his fuel mix. Unless the auto tune gets screwy in certain areas, but I doubt it. Need to have the talk with him about at least running 40:1 from now on and hope his failure rate goes down.
FEAR NO TREE. FEAR GOD.

 

Related Topics

  Subject / Started by Replies Last post
30 Replies
8785 Views
Last post February 18, 2012, 09:03:13 pm
by mdavlee
12 Replies
1619 Views
Last post November 21, 2018, 07:50:06 am
by Cut4fun .
10 Replies
1109 Views
Last post January 12, 2013, 06:22:17 pm
by don5477
10 Replies
840 Views
Last post November 24, 2022, 12:53:06 pm
by ray benson
10 Replies
895 Views
Last post March 14, 2014, 04:20:36 am
by SawTroll
6 Replies
637 Views
Last post August 28, 2014, 10:49:11 pm
by Skippysphins
18 Replies
1267 Views
Last post November 24, 2015, 10:24:58 am
by SawTroll
0 Replies
205 Views
Last post September 30, 2017, 03:03:30 pm
by weimedog
0 Replies
389 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
6 Replies
2514 Views
Last post May 25, 2018, 09:29:05 am
by Carpenter Mark