Chainsaw Repair

Cut I put some videos of a stock 395 a stock 372 xt and a ported 562 up on my youtube channel, the wood is 27 inch frozen oak, the bar I used on all cuts was a 28 inch bar and chain , the stock 395 was the fastest at 28.07 seconds , the 372 was 40.74 seconds and the ported 562 was 31.84 seconds , the 562 is the saw I fall timber with so its a real true worksaw , I like the 562 alot as its real nice and light , 28 inch bar is just to much for it thou as it does not give enough bar oil to cut this type of wood , in pine its fine  but in oak its not , I cut with 22 inch bar on it thou and its ok with that


changed ported 395 to stock 395

Kevin, new computer and everything has sure changed , nothing works like it use to so it will take me abit to get everything going again

EHP

stock 372 XT making a cut in 27 inch oak , time was 40.74 seconds

Just to confirm, you used the same bar and chain on all cuts?

Big difference in stock 372 and 395. Ported 562 looks like the ticket.