Author Topic: 562/372/395 videos  (Read 382 times)

0 Members and 0 Guests are viewing this topic.

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 598
  • Karma: 74
Re: 562/372/395 videos
« Reply #10 on: December 30, 2013, 11:32:52 pm »
the 372 is a XT but once ported it comes alive alot and its the same bar and chain in all videos , the 562 is running out of bar oil so that hurt its time , the 28 inch bar is just to much to oil in that type of wood , I run a 22 inch on it and thats about its limit as far as putting enough bar oil out , the 562 there is my own saw I fall timber with and its got lots of time on it with no problems so far , the 395 should be finished by the weekend , not going very hot on it as its going to be used in a chainsaw mill but it will gain a ton , the 395's really gain alot compared to stock  , 1 of my friends owns the 395 and the 372 , he bought one of my own ported 365 xt's that I cut timber with and just loves it , he is also being up a pretty much brandnew 371 xp that has been sitting on the shelf for years to be ported

Offline rms61moparman

  • 6 cube
  • ****
  • Posts: 270
  • Karma: 38
  • Location: Franklinton, Kentucky
Re: 562/372/395 videos
« Reply #11 on: December 31, 2013, 12:38:28 am »

You can tell just by the sound that the 562 is a runner!!!

Nice saw.


Mike

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1378
  • Karma: 195
  • Location: Manitoba Canada
Re: 562/372/395 videos
« Reply #12 on: December 31, 2013, 12:42:54 am »
The 562's chain was cutting real nice too.
Making a living with a saw since age 16.

Offline dutchsawdoctor

  • Gas Hotsaw
  • ******
  • Posts: 582
  • Karma: 45
  • Love repairing old saws
  • Location: Netherlands Flevoland
    • Saul's kettingzagen site
Re: 562/372/395 videos
« Reply #13 on: December 31, 2013, 06:37:08 am »
Love the sound of the 562, nice job done
Best regards,Saul
Dolmar  Stihl Solo Husqvarna Homelite Ole-mac Echo Jobu Ridgid Poulan Remington Pioneer Partner ,Danarm stanley
more chainsaw repairs Oldtimer-Motorsägen  http://pily.strojevlese.cz / http://www.sauls-kettingzagen-site.nl

Offline winland

  • 6 cube
  • ****
  • Posts: 215
  • Karma: 24
  • Location: 44883
    • Winland Boxers
Re: 562/372/395 videos
« Reply #14 on: December 31, 2013, 08:27:57 am »
In the original post, it first says the 395 is stock, then it says it is ported.
Typo??


Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 598
  • Karma: 74
Re: 562/372/395 videos
« Reply #15 on: January 01, 2014, 12:05:45 pm »
sorry , yes the 395 is stock in the video, its the same chain in all 3 videos and unfiled , if it had been filed the 562 would of gained the most as the smaller motor will hold higher rpms in the wood with a sharper chain

Offline jacob j.

  • 4 cube
  • **
  • Posts: 50
  • Karma: 16
Re: 562/372/395 videos
« Reply #16 on: January 01, 2014, 12:13:52 pm »
Very nice on the 562 Ed, it sounds great.

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 598
  • Karma: 74
Re: 562/372/395 videos
« Reply #17 on: January 01, 2014, 07:02:52 pm »
I am pretty happy with how that little bastard cuts and holds torque in the bigger trees , running just a 20 inch on it its alot of fun to cut with and cutting stuff like red pine you kind of have to watch or you can cut just abit to far on your notches which is not much fun  ;D, On the 562 , there was no carb work done and the straotes is still in the saw , its pretty good on fuel, It cuts the same number of trees as the 461 I got here but the 562 has a smaller tank so more trees per gallon of fuel

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: 562/372/395 videos
« Reply #18 on: January 05, 2014, 11:07:26 am »
Very Cool Vids!

I sure like my 562xp after two years and it's stock. But I might need to change that!  ;D

 

Related Topics

  Subject / Started by Replies Last post
41 Replies
611 Views
Last post April 19, 2020, 12:08:54 pm
by Cut4fun .
7 Replies
220 Views
Last post August 18, 2014, 06:27:14 am
by mdavlee .
2 Replies
63 Views
Last post September 06, 2014, 03:48:06 pm
by man of stihl
7 Replies
164 Views
Last post February 17, 2015, 08:40:31 pm
by EHP
18 Replies
560 Views
Last post November 24, 2015, 10:24:58 am
by SawTroll
2 Replies
71 Views
Last post March 13, 2018, 05:56:23 am
by Al Smith