Author Topic: 562XP / 555  (Read 5386 times)

0 Members and 0 Guests are viewing this topic.

Offline William Greene

  • 5 cube
  • ***
  • Posts: 123
  • Karma: 18
  • Location: center conway,n.h.
Re: 562XP / 555
« Reply #40 on: January 04, 2013, 08:25:19 pm »
works for me. at both places.( i'm not a good computer operator either)
thanks for fixing.

does it work for anyone else???????;)
or does in not work?......i'm gonna go get another beer & wait & watch fer a while.

Offline HusqvarnaRulez

  • 3 cube
  • *
  • Posts: 14
  • Karma: 1
Re: 562XP / 555
« Reply #41 on: January 05, 2013, 11:56:37 pm »


i'd like to see service bulletin,if possible.
thanks for posting the info so far.very nice info!!!

I looked and couldn't find one specific.  Not to say it doesn't exist, just didn't see it as Husky doesn't really announce said bulletins.

I've not had one hot start issue yet, been lucky.  The only good explanation I've gotten was from Spike saying the coil doesn't hold a strong charge when hot.  He may be able to elaborate more.

Husqvarna doesn't make bulletins available to consumers, however all dealers should have access.  I just looked and the bulletin has been changed it mentions the vent being the problem.

Offline mweba

  • Piped Saw
  • *****
  • Posts: 390
  • Karma: 53
Re: 562XP / 555
« Reply #42 on: January 06, 2013, 12:43:29 am »
Yes I have access.  I've seen carb issues but not a sb on one for hot start.  Like i said, doesn't mean it didn't/doesn't exist.   

The vent has been brought to my attention though. 

Offline HusqvarnaRulez

  • 3 cube
  • *
  • Posts: 14
  • Karma: 1
Re: 562XP / 555
« Reply #43 on: January 06, 2013, 12:59:40 am »
I had talked to one of the teachers, he had told me the problem was the main nozzle in the carb and that the hard restart was a bad ignition coil.
Then he told me if you change the coil out you have to put a new carb on all under warranty because they are mated with one another.

Said can not use the new coil with original carburetor says they run at different frequencies (HZ) like 60HZ here and 50 HZ in Europe but those were not the frequencies just an example that they are different. He had the bulletin, I saw it but didn't have time to fully read it. I thought it was online.  I should have checked online first before opening my mouth.

Offline William Greene

  • 5 cube
  • ***
  • Posts: 123
  • Karma: 18
  • Location: center conway,n.h.
Re: 562XP / 555
« Reply #44 on: January 06, 2013, 09:42:11 am »
that's what i was told too.......

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21954
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562XP / 555
« Reply #45 on: January 26, 2013, 12:38:58 pm »
Dang my local dealer is selling 555 20" set ups for  $529.95
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: 562XP / 555
« Reply #46 on: January 26, 2013, 01:00:26 pm »
the 555 here with a 16"b/c is $700ish :D
one place in ottawa is advertizing $704 with no tax this week.
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21954
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562XP / 555
« Reply #47 on: January 26, 2013, 01:28:06 pm »
the 555 here with a 16"b/c is $700ish :D
one place in ottawa is advertizing $704 with no tax this week.

From what I have read on husky prices up in Canada. That seems to be really good prices for up there.   Yes?
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: 562XP / 555
« Reply #48 on: January 26, 2013, 05:48:22 pm »
From what I have read on husky prices up in Canada. That seems to be really good prices for up there.   Yes?

yes it is. $80 bucks less than the 346 ::), and you have the taxes on top of that.
when I grow up, i wanna be an adult.

 

Related Topics

  Subject / Started by Replies Last post
218 Replies
8375 Views
Last post October 15, 2012, 07:54:08 pm
by HolmenTree
30 Replies
6432 Views
Last post February 18, 2012, 09:03:13 pm
by mdavlee
5 Replies
1395 Views
Last post June 17, 2012, 06:08:07 am
by mountainlake
16 Replies
492 Views
Last post December 10, 2013, 03:05:48 pm
by SawTroll
10 Replies
253 Views
Last post March 12, 2014, 11:07:39 pm
by HolmenTree
228 Replies
7034 Views
Last post January 03, 2019, 07:54:50 pm
by HolmenTree
6 Replies
317 Views
Last post August 28, 2014, 10:49:11 pm
by Skippysphins
18 Replies
445 Views
Last post November 24, 2015, 10:24:58 am
by SawTroll
1 Replies
183 Views
Last post September 23, 2016, 05:27:42 pm
by Cut4fun .
8 Replies
301 Views
Last post November 13, 2018, 11:41:46 am
by Cut4fun .