Author Topic: T540xp 562 560 555  (Read 7163 times)

0 Members and 0 Guests are viewing this topic.

Offline sawinredneck

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
  • Just a hack in training
Re: 562xp T540xp
« Reply #10 on: March 07, 2011, 03:21:44 pm »
Nice to know about the bar, but I assumed the 562 would be a small mount, as this has been the trend in the past?
Remember, the answers you receive are worth exactly what you paid for them!

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #11 on: March 07, 2011, 03:48:25 pm »
Nice to know about the bar, but I assumed the 562 would be a small mount, as this has been the trend in the past?

The 560xp will be small mount I believe, but will most likely not be sold in the US. Looks like we will get the 560xp and not the 562xp here. Time will tell what really happens!   ;)

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 329
  • Karma: 104
  • Location: Ulster County, NY
Re: 562xp T540xp
« Reply #12 on: March 07, 2011, 04:15:49 pm »
I'm betting/guessing the 562 we get will be the small mount. (But  I could be wrong.)  The feeling was that only the Northeast would want the choice of bar mounts. My feedback was that I would probably only stock the small mounts, and if there was going to be any weight penalty at all then the large mount would be a waste.

I've only had one issue with a 576, and it was an idle problem. Just warrantied a new carb, and it's been fine. Other than that little glitch, they've been flawless for me.

Auto-Tune is going to be showing up on lot's of saws in the future. It is
the future.
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #13 on: March 07, 2011, 04:43:50 pm »
560xp - it looks like the rear end of the pop cover is lower than it is on the 562xp.......

Offline sawinredneck

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
  • Just a hack in training
Re: 562xp T540xp
« Reply #14 on: March 07, 2011, 05:15:08 pm »
And with the small bar mount, my dreams of a 22" bar are dashed!
Remember, the answers you receive are worth exactly what you paid for them!

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #15 on: March 07, 2011, 05:29:52 pm »
And with the small bar mount, my dreams of a 22" bar are dashed!

Those bars wouldn't have balansed these light 60cc saws anyway!   ;)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562xp T540xp
« Reply #16 on: March 07, 2011, 06:10:12 pm »
And with the small bar mount, my dreams of a 22" bar are dashed!

Not at all my friend. I been down this road before.

The 22" bars that fit the Poulan 330 3450 3750 etc. Drill new bar oiler holes for the Husky oiler and elongate the bar adjuster holes to fit the small mount huskys adjuster.

I did this for a 357 and  5000  500 in the past with poulan 16"  -  22" bars. Works like a charm.

Link to the oregon pro lite 22" small mount that can be fixed to work.  http://www.baileysonline.com/itemdetail.asp?item=ORF+220SLDK041&catID=
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #17 on: March 07, 2011, 06:21:35 pm »
I guess you need an adaptor for the bar bolts to fit the slot as well, alternatively to change the bolts into 9mm ones......

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4065
  • Karma: 162
  • OHIO REDNECK
Re: 562xp T540xp
« Reply #18 on: March 07, 2011, 06:28:08 pm »
Both were 8.2mm bar slot, small mount husky and poulan with same tail mount area.

 All I know is  no spacers were needed for bar studs to run the poulan bars on the small husky saws or partner saws or redmax saws.
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4065
  • Karma: 162
  • OHIO REDNECK
REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
91 Replies
4508 Views
Last post December 18, 2016, 12:54:06 pm
by Cut4fun .
1 Replies
140 Views
Last post December 01, 2015, 11:24:23 pm
by Cut4fun .