Author Topic: T540xp 562 560 555  (Read 7179 times)

0 Members and 0 Guests are viewing this topic.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #20 on: March 07, 2011, 06:44:45 pm »
Both were 8.2mm bar slot, small mount husky and poulan with same tail mount area.

 All I know is  no spacers were needed for bar studs to run the poulan bars on the small husky saws or partner saws or redmax saws.

This really was about large Husky mount 22" Windsor bars vs. small Husky bar mount, but all info is good!

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22013
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562xp T540xp
« Reply #21 on: March 07, 2011, 06:48:44 pm »
Notice this black oem oregon poulan 16" bar being run on 362xp small mount, 262xp, 346xp, 357xp and poulan 3750.

http://www.youtube.com/watch?v=gD3rBS2SM8Y
http://www.youtube.com/watch?v=a96ULyaz7xU
http://www.youtube.com/watch?v=O3sRA3uzkwU
http://www.youtube.com/watch?v=Zd8q3wN-x6g
 

Cant find video of 357 with bar, but here is a pic of poulan bar on 357.





REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4084
  • Karma: 165
  • OHIO REDNECK
Re: 562xp T540xp
« Reply #22 on: March 07, 2011, 06:50:44 pm »
I was  just sharing info with sawinredneck that he could run a 22" bar on a small mount husky if he wanted to. 

Our info is just crisscrossing.  ;D
REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #23 on: March 07, 2011, 07:16:32 pm »
I was  just sharing info with sawinredneck that he could run a 22" bar on a small mount husky if he wanted to. 

Our info is just crisscrossing.  ;D

Yep!   ;D

Offline sawinredneck

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
  • Just a hack in training
Re: 562xp T540xp
« Reply #24 on: March 07, 2011, 08:50:53 pm »
Gotta say that 362 impressed me, more than I thought it would! But it's still a tank to carry around!

Good to see you here Niko!
You have to remember you are talking to "lazy Americans" ;D I like ported saws and I run an 18" on my 50cc saws. If 50cc's wont pull 18" in hardwood, it needs worked on or sold! So I figure a hot rodded 60cc should pull a 22-24", I know my old 262 would have pulled a 24"!

I do need to work on my skill better though, now that I've broken my back, learning your tricks with a 13" bar would be mighty helpful to me! I just hate spending that much time bucking once the tree's on the ground, I like to get wood on the trailer and go home! But maybe it's time I find a decent 40cc and hot rod it with a 13" bar. Sounds interesting for sure!
Remember, the answers you receive are worth exactly what you paid for them!

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #25 on: March 07, 2011, 09:23:51 pm »
Cool post ol' friend, but I am actually no fan of the 13" bars that are common here! The one I got with my 346 actually was sent to the US, to a "better home".   ;D

On the flip side, I am no fan of bars that makes the saws really front heavy either!  ;)

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: 562xp T540xp
« Reply #26 on: March 08, 2011, 02:56:32 pm »
Funny thing here when 357/359 came out was 357 came with 15" .325 and 359 came with 3/8 and 16" bar. I like the feel of the 15" on my limbing saws. Reach is not an issue if you bench your wood.

Hope whatever we get here that it has K095 bar tail.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 562xp T540xp
« Reply #27 on: March 08, 2011, 04:29:32 pm »
Funny thing here when 357/359 came out was 357 came with 15" .325 and 359 came with 3/8 and 16" bar. I like the feel of the 15" on my limbing saws. Reach is not an issue if you bench your wood.

Hope whatever we get here that it has K095 bar tail.

It looks like the 560xp/xpg will come standard with a K095 15" bar here - but time will tell!

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22013
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562xp T540xp
« Reply #28 on: March 08, 2011, 07:38:46 pm »
T 540xp wish they would have let us here the freaking motor in the cut.  ::)

http://www.youtube.com/watch?v=2luEz9HCmLA
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22013
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 562xp 560xp T540xp
« Reply #29 on: May 31, 2011, 01:52:22 pm »
Husqvarna 560xp

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
91 Replies
4532 Views
Last post December 18, 2016, 12:54:06 pm
by Cut4fun .
1 Replies
143 Views
Last post December 01, 2015, 11:24:23 pm
by Cut4fun .