Author Topic: Brain picking for 562 issues  (Read 352 times)

0 Members and 0 Guests are viewing this topic.

Offline weimedog

  • 6 cube
  • ****
  • Posts: 260
  • Karma: 57
Brain picking for 562 issues
« on: November 29, 2015, 01:23:23 pm »
Have a 562 that will stall after a few minutes in the cut.. then won't restart for quite a while. I did check tank vent...

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Brain picking for 562 issues
« Reply #1 on: November 29, 2015, 02:04:38 pm »
I was going to say to read the codes and see what the data log says but that's the problem . . . You'll have to get Spike to read them?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline weimedog

  • 6 cube
  • ****
  • Posts: 260
  • Karma: 57
Re: Brain picking for 562 issues
« Reply #2 on: November 29, 2015, 03:57:05 pm »
yea probably. Or just get the system myself. Its time..

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC
Re: Brain picking for 562 issues
« Reply #3 on: November 29, 2015, 10:25:34 pm »
I picked up one very reasonable a while back.  Then found out they were coming out with a new system and weren't supporting the old one.  I guess I bought an expensive reader.
Shep

Offline weimedog

  • 6 cube
  • ****
  • Posts: 260
  • Karma: 57
Re: Brain picking for 562 issues
« Reply #4 on: November 29, 2015, 10:57:59 pm »
I picked up one very reasonable a while back.  Then found out they were coming out with a new system and weren't supporting the old one.  I guess I bought an expensive reader.
Shep

Any idea of the part number of what you bought vs. the new one??

Offline wild262

  • 6 cube
  • ****
  • Posts: 161
  • Karma: 29
Re: Brain picking for 562 issues
« Reply #5 on: November 30, 2015, 12:48:07 pm »
Have a 562 that will stall after a few minutes in the cut.. then won't restart for quite a while. I did check tank vent...
Get it running again, and when it acts up again and quits, very quickly check to see if you have fire to the plug.  If not, than it may be the coil or other related ignition componants.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC
Re: Brain picking for 562 issues
« Reply #6 on: December 01, 2015, 03:45:46 pm »
The old system PN is: 583 89 71-01.  Don't know the new one.  Found out on AS in a thread can't remember thread.  I posted in that thread shouldn't be hard to find the post.  Would loan it to you if you want to use and send back to me. PM me w/address if so.
Shep

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Brain picking for 562 issues
« Reply #8 on: December 01, 2015, 06:57:01 pm »
Old one from Randy in Mowrystown, OH

http://www.ebay.com/itm/Husqvarna-Jonsered-583897101-DIAGNOSTIC-TOOL-KIT-Old-Pt-5766923014-/131498136975?hash=item1e9de6558f:g:rZsAAOSwHQ9WUxmO

"FHP 576692301 SERVICE TOOLS - Part no: Changed to 583897101 - was 5766923014"
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
568 Views
Last post February 11, 2012, 10:45:11 am
by Al Smith
CS 40 Issues

Started by martyinmi « 1 2 » Homelite

16 Replies
1366 Views
Last post September 26, 2013, 08:48:43 am
by leec
Stihl 044 issues.

Started by WoodChips « 1 2 » Stihl

15 Replies
389 Views
Last post July 23, 2013, 08:51:30 pm
by WoodChips
44 Replies
945 Views
Last post July 29, 2013, 08:15:44 pm
by 660magnum
3 Replies
271 Views
Last post November 03, 2013, 09:12:01 pm
by jmester
12 Replies
680 Views
Last post December 15, 2013, 04:37:33 pm
by doreadeal
1 Replies
189 Views
Last post January 07, 2014, 11:00:02 pm
by jmester
4 Replies
286 Views
Last post July 30, 2014, 10:21:15 pm
by aclarke
4 Replies
275 Views
Last post October 16, 2014, 06:56:46 pm
by Randy
4 Replies
123 Views
Last post March 24, 2019, 08:21:08 pm
by Efisher26