Author Topic: Carbs on 357 359  (Read 630 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22054
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Carbs on 357 359
« on: March 26, 2012, 12:44:38 pm »
Whats the difference in the walbro 199 and 175 that were used on the 357 359?   I dont ever recall a 175 on one and have only used the 199 in the past.

 The replacement zama doesn't like ported saws without some work.
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22054
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carbs on 357 359
« Reply #1 on: March 26, 2012, 12:57:01 pm »
HDA and HD carb specs

Choke Bore
17.44
17.44
19.01/17.44
19.01
22.19
Throttle Bore
15.84
17.44/15.84
17.44
19.00
20.56/19.01
Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77


Zama C3 specs

BORE DIAMETER    VENTURI DIAMETER MM
C3        16MM    13.5
C3        17.5MM    13.5, 15
C3        19.0MM    15, 16
 
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Carbs on 357 359
« Reply #2 on: March 26, 2012, 04:05:16 pm »
The reportedly "bad" walbros were the 190, 191, 198 and 199 (different numbers for EPA/not and heated/not heated saws). I don't really remember, but assume the 199 is EPA/not heated...... ;)

Offline Mastermind

  • 6 cube
  • ****
  • Posts: 224
  • Karma: 24
  • Location: Tennessee
Re: Carbs on 357 359
« Reply #3 on: March 27, 2012, 11:59:17 pm »
The reportedly "bad" walbros were the 190, 191, 198 and 199 (different numbers for EPA/not and heated/not heated saws). I don't really remember, but assume the 199 is EPA/not heated...... ;)
Whats the difference in the walbro 199 and 175 that were used on the 357 359?   I dont ever recall a 175 on one and have only used the 199 in the past.

 The replacement zama doesn't like ported saws without some work.

I'm gonna either put a 084 carb or the stock carb back on my 346........
Mastermind Work Saws
931-863-5157

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22054
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carbs on 357 359
« Reply #4 on: August 07, 2013, 03:55:39 pm »
660mag the walbro you noticed the choke not working on had to come apart.  Spray just barely got it moving a tad.  Couldn't get the shaft to work smoothly so I took it out to clean up. Time will tell.
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Carbs on 357 359
« Reply #5 on: August 07, 2013, 03:58:25 pm »
That looked like a nice carb otherwise.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Carbs on 357 359
« Reply #6 on: August 10, 2013, 03:09:27 pm »
HDA and HD carb specs

 ......

Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77
.....


At least one HD carb has a 17.46mm venturi (HD-12).

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22054
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carbs on 357 359
« Reply #7 on: August 10, 2013, 03:16:20 pm »
HDA and HD carb specs

 ......

Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77
.....


At least one HD carb has a 17.46mm venturi (HD-12).

Stuff was left out on purpose on list.

Niko I dont remember what was pulled back when the post was made but we were looking up 357 359 carbs.  12 was on 372 wasnt it??? Look at thread title was just comparing them for 357 359.

Be my guest to go through them all if you like.   ;) ;D

  HDA-10-1
  HDA-101-1
  HDA-102-1
  HDA-103-1
  HDA-104-1
  HDA-105-1
  HDA-106-1
  HDA-107-1
  HDA-108-1
  HDA-109-1
  HDA-1-1
  HDA-110-1
  HDA-111-1
  HDA-112-1
  HDA-113-1
  HDA-114-1
  HDA-115-1
  HDA-116-1
  HDA-117-1
  HDA-118-1
  HDA-119-1
  HDA-120-1
  HDA-12-1
  HDA-122-1
  HDA-123-1
  HDA-125-1
  HDA-126-1
  HDA-127-1
  HDA-128-1
  HDA-130-1
  HDA-13-1
  HDA-131-1
  HDA-132-1
  HDA-133-1
  HDA-134-1
  HDA-135-1
  HDA-136-1
  HDA-137-1
  HDA-138-1
  HDA-139-1
  HDA-140-1
  HDA-14-1
  HDA-141-1
  HDA-142-1
  HDA-143-1
  HDA-144-1
  HDA-145-1
  HDA-146-1
  HDA-147-1
  HDA-148-1
  HDA-149-1
  HDA-150-1
  HDA-15-1
  HDA-151-1
  HDA-153-1
  HDA-154-1
  HDA-155-1
  HDA-156-1
  HDA-157-1
     HDA-158-1
  HDA-159-1
  HDA-160-1
  HDA-162-1
  HDA-164-1
  HDA-165-1
  HDA-166-1
  HDA-167-1
  HDA-168-1
  HDA-169-1
  HDA-170-1
  HDA-17-1
  HDA-171-1
  HDA-172-1
  HDA-173-1
  HDA-174-1
  HDA-175-1
  HDA-176-1
  HDA-177-1
  HDA-178-1
  HDA-179-1
  HDA-180-1
  HDA-18-1
  HDA-181-1
  HDA-182-1
  HDA-183-1
  HDA-184-1
  HDA-187-1
  HDA-188-1
  HDA-189-1
  HDA-190-1
  HDA-19-1
  HDA-191-1
  HDA-192-1
  HDA-193-1
  HDA-195-1
  HDA-196-1
  HDA-197-1
  HDA-198-1
  HDA-199-1
  HDA-20-1
  HDA-201-1
  HDA-202-1
  HDA-203-1
  HDA-204-1
  HDA-205-1
  HDA-206-1
  HDA-207-1
  HDA-208-1
  HDA-209-1
  HDA-210-1
  HDA-211-1
  HDA-212-1
  HDA-213-1
  HDA-214-1
  HDA-215-1
  HDA-216-1
  HDA-217-1
  HDA-218-1
     HDA-219-1
  HDA-220-1
  HDA-22-1
  HDA-221-1
  HDA-222-1
  HDA-223-1
  HDA-224-1
  HDA-225-1
  HDA-226-1
  HDA-227-1
  HDA-228-1
  HDA-229-1
  HDA-230-1
  HDA-23-1
  HDA-231-1
  HDA-232-1
  HDA-233-1
  HDA-234-1
  HDA-235-1
  HDA-236-1
  HDA-238-1
  HDA-239-1
  HDA-24-1
  HDA-244-1
  HDA-246-1
  HDA-248-1
  HDA-255-1
  HDA-256-1
  HDA-258-1
  HDA-26-1
  HDA-268-1
  HDA-269-1
  HDA-27-1
  HDA-271-1
  HDA-272-1
  HDA-274-1
  HDA-275-1
  HDA-28-1
  HDA-285-1
  HDA-286-1
  HDA-29-1
  HDA-297-1
  HDA-30-1
  HDA-301-1
  HDA-307-1
  HDA-308-1
  HDA-3-1
  HDA-31-1
  HDA-32-1
  HDA-33-1
  HDA-34-1
  HDA-35-1
  HDA-36-1
  HDA-39-1
  HDA-40-1
  HDA-41-1
  HDA-42-1
  HDA-43-1
  HDA-44-1
     HDA-45-1
  HDA-46-1
  HDA-47-1
  HDA-48-1
  HDA-49-1
  HDA-50-1
  HDA-51-1
  HDA-52-1
  HDA-53-1
  HDA-54-1
  HDA-55-1
  HDA-56-1
  HDA-57-1
  HDA-58-1
  HDA-59-1
  HDA-60-1
  HDA-6-1
  HDA-61-1
  HDA-62-1
  HDA-63-1
  HDA-64-1
  HDA-66-1
  HDA-67-1
  HDA-68-1
  HDA-69-1
  HDA-70-1
  HDA-7-1
  HDA-71-1
  HDA-72-1
  HDA-73-1
  HDA-74-1
  HDA-75-1
  HDA-75X-1
  HDA-76-1
  HDA-77-1
  HDA-78-1
  HDA-79-1
  HDA-80-1
  HDA-82-1
  HDA-83-1
  HDA-84-1
  HDA-85-1
  HDA-86-1
  HDA-87-1
  HDA-88-1
  HDA-89-1
  HDA-90-1
  HDA-9-1
  HDA-91-1
  HDA-92-1
  HDA-93-1
  HDA-95-1
  HDA-96-1
  HDA-97-1
  HDA-98-1
  HDA-99-1

 HD-1-1
  HD-11A
  HD-12-1
  HD-20-1
  HD-2-1
  HD-24A
  HD-24B
  HD-30-1
  HD-3-1
  HD-4-1
  HD-43-1
  HD-44-1
  HD-48-1
  HD-5-1
  HD-51-1
  HD-52-1
  HD-55-1
  HD-56-1
  HD-6-1
  HD-7-1
REDNECK Saw Repair Getter Done

Offline wisecobandit

  • 3 cube
  • *
  • Posts: 22
  • Karma: 4
Re: Carbs on 357 359
« Reply #8 on: August 10, 2013, 05:53:22 pm »
1 of my 357's has the 175 carb on and it did suffer the 199 issue as it has the same port. All fixed now tho  ;D

Its an early 2003 saw and has the spacer block. Cant say I enjoyed the zama I bought to replace it and now refitted it and the saws back to its old self and will 4 stroke again. The zama has just been stuck back in its box....

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22054
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carbs on 357 359
« Reply #9 on: August 10, 2013, 06:58:31 pm »
I got a 175 here I'm not going to use.  Was a back up carb to my 199's.  Sat so long the choke shaft got to where it wouldnt move, so pulled it out to clean back up.  If anyone interested in it.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
201 Views
Last post March 08, 2014, 08:51:04 am
by farmboy
1 Replies
106 Views
Last post March 11, 2014, 09:01:49 pm
by aclarke
6 Replies
437 Views
Last post May 29, 2014, 11:12:27 am
by SawTroll
4 Replies
233 Views
Last post August 30, 2014, 11:11:56 am
by SawTroll
HDA 137 164 carbs

Started by Cut4fun . « 1 2 3 » Poulan

25 Replies
462 Views
Last post April 22, 2018, 06:51:09 am
by Cut4fun .
5 Replies
608 Views
Last post December 24, 2015, 11:45:00 am
by Cut4fun .
14 Replies
465 Views
Last post December 31, 2015, 08:48:24 pm
by Cut4fun .
10 Replies
367 Views
Last post December 07, 2016, 10:44:46 pm
by mdavlee .
2 Replies
296 Views
Last post June 05, 2019, 10:11:23 pm
by Al Smith
1 Replies
180 Views
Last post February 12, 2018, 07:06:36 am
by Cut4fun .