Author Topic: Cylinder help again  (Read 1186 times)

0 Members and 0 Guests are viewing this topic.

Offline Magnus

  • 6 cube
  • ****
  • Posts: 237
  • Karma: 26
  • Location: Sweden
    • Chainsaw Collectors Forum
Re: Cylinder help again
« Reply #40 on: December 31, 2013, 07:31:37 am »
I dig thru the boxes and look for the other 262 another day.
Chainsaw nut!

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Cylinder help again
« Reply #41 on: December 31, 2013, 09:18:54 am »
I will look at mine and get the casting number and post here.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Cylinder help again
« Reply #42 on: December 31, 2013, 09:38:44 am »
Now, have the other repaired so you have a spare, that you can have ported!
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Miller-Thinner2

  • 5 cube
  • ***
  • Posts: 90
  • Karma: 8
Re: Cylinder help again
« Reply #43 on: December 31, 2013, 11:23:59 am »
This was a 266 right? With Gilardoni  5034479?

If so I add it to list!

I noted in list the 262 has a Gilardoni A 166 1B+ cylinder. If I have it still I snap a pic.

I was told it was 266 when I got it, but I am not 100% sure.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Cylinder help again
« Reply #44 on: December 31, 2013, 09:34:01 pm »
This was a 266 right? With Gilardoni  5034479?

If so I add it to list!

I noted in list the 262 has a Gilardoni A 166 1B+ cylinder. If I have it still I snap a pic.

I was told it was 266 when I got it, but I am not 100% sure.

Does it have open or closed transfers?

Offline Miller-Thinner2

  • 5 cube
  • ***
  • Posts: 90
  • Karma: 8
Re: Cylinder help again
« Reply #45 on: December 31, 2013, 11:41:18 pm »
This was a 266 right? With Gilardoni  5034479?

If so I add it to list!



I was told it was 266 when I got it, but I am not 100% sure.

Does it have open or closed transfers?

closed. But I can not confirm it is a 266. It had a 266 starter side but no serial number# tag when I got the saw.  I dont have much knowledge on saws but the cylinder I put on it was off a 266 if that matters. From my understanding some cylinders are interchangeable so it prob doesnt mean anything

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Cylinder help again
« Reply #46 on: January 02, 2014, 08:24:56 am »
This was a 266 right? With Gilardoni  5034479?

If so I add it to list!



I was told it was 266 when I got it, but I am not 100% sure.

Does it have open or closed transfers?

closed. But I can not confirm it is a 266. It had a 266 starter side but no serial number# tag when I got the saw.  I dont have much knowledge on saws but the cylinder I put on it was off a 266 if that matters. From my understanding some cylinders are interchangeable so it prob doesnt mean anything

Do you have a picture of the inside (transfers) of that cylinder?

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Cylinder help again
« Reply #47 on: January 02, 2014, 08:43:26 am »
Niko, if you click on the OP pictures it will bring up an album, which hs a picture of what I believe is a 266 cylinder
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Cylinder help again
« Reply #48 on: January 02, 2014, 08:48:12 am »
Niko, if you click on the OP pictures it will bring up an album, which hs a picture of what I believe is a 266 cylinder
I agree 266 cyl.
Shep

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Cylinder help again
« Reply #49 on: January 02, 2014, 09:40:40 am »
Niko, if you click on the OP pictures it will bring up an album, which hs a picture of what I believe is a 266 cylinder
Yes, at least it is a closed loop one, so if that is the Gilardoni in question, it is a 266 one.

But where do I find those pictures?  ???

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
103 Views
Last post February 13, 2016, 11:05:35 am
by sharkey
2 Replies
237 Views
Last post November 07, 2016, 05:17:35 pm
by oldpro
4 Replies
121 Views
Last post November 06, 2016, 10:35:55 am
by SawTroll
3 Replies
285 Views
Last post November 21, 2016, 02:29:41 pm
by Cut4fun .
1 Replies
281 Views
Last post November 22, 2016, 05:54:51 pm
by Cut4fun .
7 Replies
203 Views
Last post August 25, 2017, 06:40:44 am
by jmester
10 Replies
294 Views
Last post August 22, 2018, 07:58:11 am
by pete
5 Replies
124 Views
Last post November 19, 2019, 11:03:09 am
by Cut4fun .
0 Replies
26 Views
Last post February 17, 2020, 07:27:15 am
by Cut4fun
4 Replies
142 Views
Last post February 29, 2020, 07:34:27 am
by Cut4fun .