Author Topic: Exhaust Deflector  (Read 1006 times)

0 Members and 0 Guests are viewing this topic.

Offline wannab12

  • 4 cube
  • **
  • Posts: 36
  • Karma: 1
  • Location: Norwood,Ontario
Exhaust Deflector
« on: April 27, 2011, 09:32:00 am »
I remember a discussion where it was said the 288 exhaust deflectors were getting "pricey" & I think Kevin suggested an alternative..............well I'll be danged if I can find it. Does anyone know of it ????

Steve

Share on Facebook Share on Twitter


Offline 05_sprcrw

  • 4 cube
  • **
  • Posts: 65
  • Karma: 3
Re: Exhaust Deflector
« Reply #1 on: April 27, 2011, 11:30:46 am »
I wouldn't mind knowing this either, I am getting ready to mod a 394 and need to purchase 2 of them. If there is a cheaper alternative I am always up for it.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Exhaust Deflector
« Reply #2 on: April 27, 2011, 12:57:47 pm »
The thread was in the wanted section where MoS was looking for them.  link  http://chainsawrepair.createaforum.com/wanted/husqvarna-288-muffler-deflector/

REDNECK Saw Repair Getter Done

Offline wannab12

  • 4 cube
  • **
  • Posts: 36
  • Karma: 1
  • Location: Norwood,Ontario
Re: Exhaust Deflector
« Reply #3 on: April 27, 2011, 01:36:30 pm »
Thanks Kevin.  8)

Steve

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 163
Re: Exhaust Deflector
« Reply #4 on: April 27, 2011, 05:39:17 pm »
If you were fairly handy with sheet metal it wouldn't be difficult to make .I've made them for the Stihls to add a second hole in the muff and there's nothing  to it .

Offline 05_sprcrw

  • 4 cube
  • **
  • Posts: 65
  • Karma: 3
Re: Exhaust Deflector
« Reply #5 on: April 28, 2011, 07:20:52 am »
If you were fairly handy with sheet metal it wouldn't be difficult to make .I've made them for the Stihls to add a second hole in the muff and there's nothing  to it .

I thought about doing this as well, I just have not got that far yet. And if I get them cheap enough I would probably order just for the convenience of things.

Offline nmurph

  • 4 cube
  • **
  • Posts: 54
  • Karma: -1
Re: Exhaust Deflector
« Reply #6 on: May 09, 2011, 12:10:08 pm »
I ordered several of the deflector from my H dealer, but I bought a sheet of SS screen from McMaster-Carr for about $12. I think I can get something like 30 MM from it. That cuts the cost roughly in half. I did buy a piece of sheetmetal from Lowe's with the idea of bending my own but I have run out of the OEM deflectors.. It shouldn't be to hard to make something that is passable.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Exhaust Deflector
« Reply #7 on: January 26, 2014, 10:22:58 pm »
Northwoodsaw.com $8 can't tell the difference from oem

http://northwoodsaw.com/store/index.php?l=product_detail&p=1251
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Exhaust Deflector
« Reply #8 on: November 16, 2014, 01:09:54 pm »
Just saving 2 good pics by Brad.

503 58 99-01  503589901 /  503 0783-01  503078301



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Exhaust Deflector
« Reply #9 on: November 16, 2014, 01:13:35 pm »
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
68 Replies
2466 Views
Last post December 19, 2015, 05:37:53 pm
by Cut4fun .
2 Replies
164 Views
Last post March 19, 2013, 04:14:39 am
by Al Smith
20 Replies
517 Views
Last post November 09, 2013, 10:09:18 am
by Moparmyway
36 Replies
555 Views
Last post November 28, 2018, 04:34:07 am
by Al Smith
1 Replies
215 Views
Last post January 25, 2016, 11:21:00 am
by srcarr52