Chainsaw Repair

3500 to 13,500 are good numbers to go with on the 357XP.  Idling below 3500rpm gets to be too unstable. The clutch starts to engage at 4500-5000. The 12,000 is Fine for the high speed if you feel better with it there as long as the chainsaw "two strokes" in the cut? The high speed above 13,500 is getting a little lean for cutting all day? These numbers are approximate because the tach numbers jump around a little bit and will vary according to the temperature.

There is no rpm limiter on the coil of the 357.