Author Topic: Fuel tank replacement  (Read 1904 times)

0 Members and 39 Guests are viewing this topic.

Offline DeerMeadowFarm

  • 3 cube
  • *
  • Posts: 24
  • Karma: 0
  • Location: Central Mass

  • Total Badges: 11
    Badges: (View All)
    Apple User Mobile User Second year Anniversary 10 Posts Topic Starter Level 2
Re: Fuel tank replacement
« Reply #30 on: January 13, 2014, 11:20:35 am »
Does the wire unplug from the coil end? Would I even need to remove the coil?

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: Fuel tank replacement
« Reply #31 on: January 13, 2014, 11:42:25 am »
Yes the plug wire is removable from the coil. The plug wire has a little rubber boot that you slide up the plug wire. Then the wire will unscrew from the coil. The coil has a little inverted screw that the plug wire screws on to. The inverted screw is part of the coil and is neither visible nor removable. You trim the new plug wire to be flat eg cut squarely across then put the boot on the wire, slide it up the wire to give yourself room to work. Then insert the wire into the hole firmly and turn it clockwise to screw it on to the inverted screw. Get the wire in the hole such that the inverted screw will screw into the center conductor of the plug wire. Push the boot back down and you are done. It is kind of tight working when the coil is on the saw, that is why I suggested removing it.
 
Besides, you would then know how to set the coil air gap along with how to replace a tank! ::)
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline DeerMeadowFarm

  • 3 cube
  • *
  • Posts: 24
  • Karma: 0
  • Location: Central Mass

  • Total Badges: 11
    Badges: (View All)
    Apple User Mobile User Second year Anniversary 10 Posts Topic Starter Level 2
Re: Fuel tank replacement
« Reply #32 on: January 13, 2014, 11:43:29 am »
True.....

Offline DeerMeadowFarm

  • 3 cube
  • *
  • Posts: 24
  • Karma: 0
  • Location: Central Mass

  • Total Badges: 11
    Badges: (View All)
    Apple User Mobile User Second year Anniversary 10 Posts Topic Starter Level 2
Re: Fuel tank replacement
« Reply #33 on: January 14, 2014, 02:05:51 pm »
Can I buy a quality replacement wire? Should I try to reattach the boot I have?

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: Fuel tank replacement
« Reply #34 on: January 14, 2014, 03:51:36 pm »
You can buy a wire with the boot already attached here:

http://www.hlsproparts.com/Spark-plug-wire-with-cap-p/h45000.htm

The big $4, looks like the one that was on it, save the piece of insulation tube and put it on the new wire. Here is a picture of te coil so you know what you are looking for when you remove the starter:

http://www.hlsproparts.com/Husqvarna-replacement-coil-fits-many-models-p/h45365.htm

Cheers
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline DeerMeadowFarm

  • 3 cube
  • *
  • Posts: 24
  • Karma: 0
  • Location: Central Mass

  • Total Badges: 11
    Badges: (View All)
    Apple User Mobile User Second year Anniversary 10 Posts Topic Starter Level 2
Re: Fuel tank replacement
« Reply #35 on: January 14, 2014, 04:24:36 pm »
Thanks for the help, once again!

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: Fuel tank replacement
« Reply #36 on: January 14, 2014, 05:15:47 pm »
There are two magnets embedded in the flywheel on the same side, there are two poles on the coil, make sure that you ger the two magnets on the flywheel centered (one in line with each pole on the coil) before you tighten the coil bck down. A little blue Loc-Tite on the screws helps to keep the thing from coming loose.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline DeerMeadowFarm

  • 3 cube
  • *
  • Posts: 24
  • Karma: 0
  • Location: Central Mass

  • Total Badges: 11
    Badges: (View All)
    Apple User Mobile User Second year Anniversary 10 Posts Topic Starter Level 2
Re: Fuel tank replacement
« Reply #37 on: January 30, 2014, 09:37:38 am »
Well....wire swap is not going as planned. I'm not sure that this on screws in:



What now?

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna

  • Total Badges: 29
    Badges: (View All)
    2000 post CR Staff One year Anniversary 1000 Posts Never Sleep Group
Re: Fuel tank replacement
« Reply #38 on: January 30, 2014, 10:04:36 am »
Buy a new one, that one looks to be in pretty bad shape.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline DeerMeadowFarm

  • 3 cube
  • *
  • Posts: 24
  • Karma: 0
  • Location: Central Mass

  • Total Badges: 11
    Badges: (View All)
    Apple User Mobile User Second year Anniversary 10 Posts Topic Starter Level 2
Re: Fuel tank replacement
« Reply #39 on: January 30, 2014, 10:21:08 am »
Crap....

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
681 Views
Last post November 17, 2017, 08:22:36 am
by Cut4fun .
7 Replies
4287 Views
Last post April 23, 2013, 04:21:14 pm
by Go JayBee
13 Replies
935 Views
Last post October 05, 2014, 11:23:57 pm
by 3000 FPS
0 Replies
458 Views
Last post March 27, 2014, 12:28:36 pm
by farmboy
29 Replies
1951 Views
Last post May 14, 2014, 11:33:15 pm
by Jason K
3 Replies
620 Views
Last post July 20, 2014, 06:32:40 pm
by 660magnum
6 Replies
967 Views
Last post November 08, 2021, 02:24:00 pm
by partner
1 Replies
252 Views
Last post March 07, 2015, 12:41:37 pm
by Cut4fun .
0 Replies
151 Views
Last post April 23, 2015, 04:35:16 pm
by Giles
1 Replies
372 Views
Last post February 09, 2017, 12:26:19 pm
by Cut4fun .