« previous next »
Pages: [1]   Go Down

Author Topic: 372X-Torq Transfer Port Covers and Seals  (Read 537 times)

0 Members and 2 Guests are viewing this topic.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
372X-Torq Transfer Port Covers and Seals
« on: March 03, 2014, 09:05:10 am »
Anybody been able to come up with a part number for the XT transfer port cover o-ring seals?
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Share on Facebook Share on Twitter

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 372X-Torq
« Reply #1 on: March 03, 2014, 09:12:00 am »
The cover or the seals are not available separately, You have to buy the complete cylinder and piston assembly to get them.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 372X-Torq
« Reply #2 on: March 03, 2014, 09:13:18 am »
Same as I have found!
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 372X-Torq
« Reply #3 on: March 03, 2014, 09:20:43 am »
Are they actual o rings?  Could you make our own?
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 372X-Torq
« Reply #4 on: March 03, 2014, 09:39:06 am »
Hey Adam! Well not exactly, they are circular in cross section like an o-ring but they are shaped sort of like a parallelogram and are different for each side and they appear to be molded in that shape as they retain the shape after being removed. They fit between the cylinder and the TP covers into a half round groove in the cylinder and a matching one in the TP cover itself.

About the only way to get them is to buy a trashed X-torq jug, if the seller leaves them on, but most strip them off.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 372X-Torq Transfer Port Covers and Seals
« Reply #5 on: March 03, 2014, 10:45:26 am »
O ring kits that include bulk o ring stock, glue (super glue) and sealer might be the way to go?  I've been making my own for years, saves me a lot of time. Kits are kinda pricey, you can buy the stock cheaply, cut to size and use super glue. 
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 372X-Torq Transfer Port Covers and Seals
« Reply #6 on: March 03, 2014, 10:55:59 am »
The people that have been removing the transfer covers have not had trouble removing the molded seals and have used the anaerobic sealer along with the old seal at replacement of the transfer cover.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 372X-Torq Transfer Port Covers and Seals
« Reply #7 on: March 03, 2014, 11:01:38 am »
Good thoughts both, o-ring kit and yamabond!
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: 372X-Torq Transfer Port Covers and Seals
« Reply #8 on: March 03, 2014, 05:29:59 pm »
I've used regular O-rings on Solo 603 jugs and also Husky 350's, just bend to fit and add some PermaTex lol
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
3 Replies
774 Views 		Last post May 09, 2012, 04:59:28 pm
by 660magnum
2 Replies
889 Views 		Last post July 23, 2012, 07:49:15 am
by 660magnum
0 Replies
188 Views 		Last post March 03, 2013, 08:14:40 pm
by Cut4fun
26 Replies
2902 Views 		Last post December 15, 2020, 09:16:53 pm
by Al Smith
26 Replies
953 Views 		Last post March 02, 2015, 09:31:02 am
by Ducksnuff870
8 Replies
685 Views 		Last post May 08, 2015, 12:21:49 am
by aclarke
0 Replies
691 Views 		Last post April 07, 2016, 01:41:04 pm
by Cut4fun .
4 Replies
701 Views 		Last post April 18, 2018, 01:10:06 am
by 660magnum
8 Replies
848 Views 		Last post April 23, 2021, 06:51:23 am
by Cut4fun .
5 Replies
528 Views 		Last post July 18, 2021, 09:53:29 am
by Cut4fun