Author Topic: Husky 44 Coil 1984-01 thru 1988-08  (Read 750 times)

0 Members and 0 Guests are viewing this topic.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Husky 44 Coil 1984-01 thru 1988-08
« on: July 31, 2011, 09:43:19 pm »
Husky 44 1984-01 thru 1988-08.
Coil PN: 501-5972-01 w/505-3255-39 Trigger module
501-5972-01 RB: 503-8322-01 (44-444)
503-8322-01 RB: 506-0272-07 (254-257-261-262-51-55)
506-0272-01 RB: 544-0183-01

The diagram #106 76 42-98 shows 44 and 444
I have a diagram that was in the coil box PN: 503-8322-01 that shows cutting off the wire that goes to trigger 505-3255-39 and discontinue trigger then use 503-8322-01 coil.  I tried to scan the diagram into computer but scan function would not work.  Anyway to use the Husky 55 coil PN: 544-0183-01 you will have to elongate the rear holddown screw slot to get enough adjustment.  This was determined by visual comparison as I have all the above PN's.  The coil in the box 503-8322-01 is a 506-0272-07.  I compared it to another 506-0272-07 the difference was an extra rear coil mounting hole.  506-0272-07 replaced by 544-0183-01.

Shep

Share on Facebook Share on Twitter

Informative Informative x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #1 on: August 01, 2011, 06:35:03 am »
Husqvarna 44 IPL scroll down for  coil view.   http://s30387.gridserver.com/partsDiagrams/Husqvarna%2044.pdf
REDNECK Saw Repair Getter Done

Offline BobRees

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #2 on: November 22, 2016, 08:31:18 am »
Shep,
I have a 44 with no spark. The original coil is no longer available from dealers.
Thanks for you post, but I didn't fully understand. Are you saying I can replace the existing coil with an alternative ?
Which is the alternative please ?
Do I still need the trigger unit ?
Thanks in advance,
Bob

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #3 on: November 22, 2016, 10:35:40 pm »
I have new and used coils.  What year model is your 44.  Need serial number to determine which coil.
Shep

Offline BobRees

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #4 on: November 23, 2016, 08:24:26 am »
Thanks Shep
I think I bought it in about 1988, I traded it for a used 85cc saw and I was so much better off !

Serial # 8050105

The label is a bit damaged, but I think the 3rd number is a "5"
Do you think I need the coil and that little control module as well ?

Thanks,  Bob

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #5 on: November 23, 2016, 10:57:51 pm »
I have a set (coil+ trigger+wiring IIRC)off the same saw.  will check tomorrow to be sure.
Shep
Winner Winner x 1 View List

Offline BobRees

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #6 on: November 25, 2016, 11:05:42 am »
Shep
I really appreciate your help on this. My "44" maybe getting old, but I really like it, and I'd hate to lose it.
I noticed I don't live too far from you - Greenville SC. Maybe I could come up this weekend to get the bits ?
Thanks,
Bob

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #7 on: November 25, 2016, 02:26:38 pm »
That would be outstanding! I'll pm you my address.
Shep

Like Like x 1 View List

Offline BobRees

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #8 on: November 25, 2016, 05:29:25 pm »
Thanks
Would Sunday early afternoon suit you ?
Bob

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Husky 44 Coil 1984-01 thru 1988-08
« Reply #9 on: November 25, 2016, 09:58:06 pm »
That would be fine.
Shep

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
337 Views
Last post June 18, 2011, 08:25:29 am
by farmboy
2 Replies
404 Views
Last post October 15, 2012, 10:52:17 pm
by chainsman1
6 Replies
395 Views
Last post January 31, 2013, 08:20:11 pm
by 660magnum
12 Replies
2021 Views
Last post March 27, 2016, 01:48:26 pm
by gregh
20 Replies
970 Views
Last post September 23, 2014, 08:49:50 pm
by aclarke
15 Replies
426 Views
Last post January 23, 2015, 02:03:24 pm
by Bluegill
9 Replies
137 Views
Last post February 17, 2016, 11:09:50 am
by huskyslinger
6 Replies
361 Views
Last post July 15, 2016, 10:49:52 pm
by Acel83
2 Replies
337 Views
Last post July 28, 2016, 04:08:23 am
by pete
7 Replies
374 Views
Last post June 05, 2017, 12:32:21 pm
by Cut4fun .