« previous next »
Pages: [1]   Go Down

Author Topic: Husqvarna 235 coil problem  (Read 1438 times)

0 Members and 1 Guest are viewing this topic.

Offline RobCleveland

  • pruner
  • *
  • Posts: 1
  • Karma: 0
Husqvarna 235 coil problem
« on: June 10, 2020, 06:54:38 am »
I recently acquired a Husqvarna 235 which had a defective coil. I ordered one on Amazon which was represented to be a match for the stock ignition coil part # 530-039143. When the engine is cycled in the correct rotation as determined by the action of the recoil there is no spark. Oddly if the engine is cycled in the opposite direction there is spark at the plug.
Just wondering if anyone had an explanation for this?
I have returned the coil for a refund.
Might have to break down and pay the $$ for a genuine Husqvarna part but I was hoping for a cheap fix as I know the saw has been sitting for a number of years and there could be other problems.
.......Rob
Logged

Share on Facebook Share on Twitter

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23987
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 235 coil problem
« Reply #1 on: June 10, 2020, 07:16:07 am »
OEM coil here shows $16. That is a orange poulan.  But other places I shop show OEM coils $45. So not sure why the one in link is cheaper like that. https://www.pantanopowerequipment.com/parts/ignition-coils/husqvarna-craftsman-oem-chainsaw-ignition-module-coil-545199901-530039143.html


 might have a used coil here.  If you want me to check for ya.


Aftermarket ones can be hit and miss. No clue what you got going on.

 Fits Models:   

Poulan:

    2600 Chainsaw Gas Chain Saw   
    2775 Type 1 Gas Chain Saw
    2775 Type 2 Gas Chain Saw   
    2775 Type 3 Gas Chain Saw
    2900 Type 3 Gas Chain Saw   
    2750 Gas Chain Saw
    2775 Type 4 Gas Chain Saw   
    2900 Type 2 Gas Chain Saw
    3050 Gas Chain Saw   
    2500 Gas Chain Saw
    2900 (Type 4) Gas Chainsaw   
    PP255 Gas Chainsaw
    2900 (Type 1) Gas Chainsaw   
    PP295 (2005) Chainsaw


Husqvarna:

    41 (1991-06) Chainsaw   
    41 (1994-05) Chainsaw
    41 (1997-07) Chainsaw   
    36 (1991-06) Chainsaw
    36 (1994-05) Chainsaw   
    36 (1997-07) Chainsaw
    240 (2008-01) Chainsaw   
    240 E (2008-01) Chainsaw
    136 (1998-09) Chainsaw   
    136 (2001-05) Chainsaw
    136 (2001-09) Chainsaw   
    136 (2003-01) Chainsaw
    136 (2003-06) Chainsaw   
    136 (2004-01) Chainsaw
    136 LE (2004-03) Chainsaw   
    136 LE (2001-06) Chainsaw
    141 (1998-09) Chainsaw   
    141 (2001-05) Chainsaw
    141 (2001-09) Chainsaw
    141 (2003-01) Chainsaw
    141 (2003-06) Chainsaw   
    141 (2004-01) Chainsaw
    141 LE (2004-05) Chainsaw   
    235 (2008-01) Chainsaw
    235 E (2008-01) Chainsaw   
    36 (1991-06) Chainsaw
Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4708
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Husqvarna 235 coil problem
« Reply #2 on: June 10, 2020, 10:27:40 am »
That one coil sure fits a lot of saws

Technically it is a magnet passing by a coil from a close distance.   The magnet is polarized and so would cause current flow in one direction and if reversed would cause current flow in a opposite direction.    If there is a diode in the circuit that would prevent the reverse direction from happening and would only allow spark in one direction.    With out a schematic of the coil it is hard to say what is stopping the current in one direction but allowing in the other and there is a lot more in these solid state ignitions than just a coil of wire.
Logged
PP 505, 475, 445.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23987
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 235 coil problem
« Reply #3 on: June 10, 2020, 10:37:35 am »
Guessing you tried aftermarket right?

OEM pulled from a running saw that scored.

If needed.

Logged
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23987
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 235 coil problem
« Reply #4 on: June 10, 2020, 11:54:18 am »
Guys in my chainsaw repair group on facebook said they have seen this on other aftermarket coils too.
Logged
Like Like x 1 View List
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
4 Replies
2145 Views 		Last post February 28, 2015, 11:59:49 am
by Cut4fun
7 Replies
2345 Views 		Last post April 20, 2012, 07:22:04 am
by farmboy
2 Replies
882 Views 		Last post October 15, 2012, 10:52:17 pm
by chainsman1
4 Replies
4411 Views 		Last post February 20, 2013, 01:47:20 pm
by Cut4fun .
22 Replies
2352 Views 		Last post August 29, 2013, 09:17:00 am
by fordfairlane78
0 Replies
231 Views 		Last post December 04, 2013, 07:38:06 pm
by SELLSEVERYTHING
3 Replies
778 Views 		Last post August 07, 2014, 02:02:53 pm
by Cut4fun .
15 Replies
997 Views 		Last post March 22, 2015, 04:05:11 pm
by Jason K
6 Replies
1614 Views 		Last post June 23, 2015, 01:36:09 pm
by Fish
1 Replies
145 Views 		Last post April 04, 2024, 06:32:18 am
by Cut4fun .