Author Topic: Husqvana 136 won't start  (Read 72 times)

0 Members and 0 Guests are viewing this topic.

Offline andrewedmondson

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Husqvana 136 won't start
« on: June 11, 2020, 02:24:34 pm »
My Husqvana 136 suddenly died and won't start.
I cleaned the fuel tank, checked plug is sparking, checked carb diaphragm.
It will start for a very brief time only if the throttle is fully open. Then it dies.
I replaced the carb  a couple of years ago.
Halfway through a job.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22074
  • Karma: 548
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvana 136 won't start
« Reply #1 on: June 11, 2020, 04:09:48 pm »
Pull muffler check for scoring or stuck ring.  Need good compression, gas, spark. Check all 3.
REDNECK Saw Repair Getter Done

Offline andrewedmondson

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Re: Husqvana 136 won't start
« Reply #2 on: June 12, 2020, 12:00:51 pm »
Thanks for the advice.

Compression is 135psi.

I've attached a photo of the piston. Doesn't seem scored.

Muffler is oily; is that normal?

I ran it for longer today, starting with full throttle again.
It smoked quite a bit, misfired and sounded tinny.
Died when throttling down.
Adjusting jets made no difference.

I removed the air filter and ran it the same way. Petrol sprayed out of the carb. Is that normal?

I've ordered a new carb from Hong Kong. Will take a month to get here though.

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
611 Views
Last post January 09, 2012, 06:15:45 pm
by Jeff
038 won't start

Started by mtnvol1 « 1 2 » Stihl

13 Replies
708 Views
Last post October 27, 2013, 01:49:44 pm
by 660magnum
6 Replies
540 Views
Last post October 14, 2013, 08:43:35 am
by Adirondackstihl
4 Replies
223 Views
Last post June 21, 2014, 04:34:41 pm
by davierob2
1 Replies
270 Views
Last post July 22, 2014, 05:36:53 pm
by aclarke
20 Replies
579 Views
Last post October 10, 2014, 09:05:05 am
by aclarke
4 Replies
743 Views
Last post November 27, 2016, 08:59:14 pm
by mdavlee .
026 Pro won't start

Started by BHB « 1 2 » Stihl

14 Replies
412 Views
Last post March 23, 2017, 10:40:57 am
by BHB
4 Replies
307 Views
Last post July 17, 2017, 04:04:00 pm
by Cut4fun .
5 Replies
149 Views
Last post September 12, 2018, 07:25:08 pm
by dudechuck