Author Topic: Husqvarna 266SE starter cord very hard to pull. (Read 3423 times)

Spike60 · « **Reply #10 on:** April 20, 2020, 06:28:45 am »

Hate to say, or ask this but I wonder what the age of the OP is? We get plenty of older guys come into the store complaining that a saw is "hard to pull over" and there must be something wrong with it. Sadly, the problem is that these guys have reached a point where they can no longer snap the rope enough to start the saw. Kind of a delicate thing to communicate to the customer without offending them. Whether we start the saw or ask them to try it, you don't want to make them feel like crap. Best to say "we" are all getting older. This problem is worse for someone who might go a long time between saw use, vs someone who runs a saw all the time.

Cut4fun . · « **Reply #11 on:** April 20, 2020, 07:21:01 am »

Quote from: Spike60 on April 20, 2020, 06:28:45 am

Hate to say, or ask this but I wonder what the age of the OP is? We get plenty of older guys come into the store complaining that a saw is "hard to pull over" and there must be something wrong with it. Sadly, the problem is that these guys have reached a point where they can no longer snap the rope enough to start the saw. Kind of a delicate thing to communicate to the customer without offending them. Whether we start the saw or ask them to try it, you don't want to make them feel like crap. Best to say "we" are all getting older. This problem is worse for someone who might go a long time between saw use, vs someone who runs a saw all the time.

Dad just gave me his farm use saw due to such 2 winters ago. Age and bad shoulder caught up to him.

3000 FPS · « **Reply #12 on:** April 20, 2020, 10:41:19 am »

Yep I used to see it when I was working part time in a shop. People would bring in a saw and all it needed was someone who could pull it over real good.

Spike60 · « **Reply #13 on:** April 21, 2020, 06:35:17 am »

Quote from: Cut4fun . on April 20, 2020, 07:21:01 am

Quote from: Spike60 on April 20, 2020, 06:28:45 am
Hate to say, or ask this but I wonder what the age of the OP is? We get plenty of older guys come into the store complaining that a saw is "hard to pull over" and there must be something wrong with it. Sadly, the problem is that these guys have reached a point where they can no longer snap the rope enough to start the saw. Kind of a delicate thing to communicate to the customer without offending them. Whether we start the saw or ask them to try it, you don't want to make them feel like crap. Best to say "we" are all getting older. This problem is worse for someone who might go a long time between saw use, vs someone who runs a saw all the time.

Dad just gave me his farm use saw due to such 2 winters ago. Age and bad shoulder caught up to him.

It's gonna catch us all. Did you come up with an alternative for him? Soomething smaller and easier to start. My Dad is 90 and can still start the 350 I leave at his house. Some customers have gone the battery route. The little 120i runs with only the smallest gas saws, but it does more work than a saw that they can't get going. Keeps the guys out and active too.

Cut4fun . · « **Reply #14 on:** April 21, 2020, 07:30:12 am »

Quote from: Spike60 on April 21, 2020, 06:35:17 am

Quote from: Cut4fun . on April 20, 2020, 07:21:01 am
Quote from: Spike60 on April 20, 2020, 06:28:45 am
Hate to say, or ask this but I wonder what the age of the OP is? We get plenty of older guys come into the store complaining that a saw is "hard to pull over" and there must be something wrong with it. Sadly, the problem is that these guys have reached a point where they can no longer snap the rope enough to start the saw. Kind of a delicate thing to communicate to the customer without offending them. Whether we start the saw or ask them to try it, you don't want to make them feel like crap. Best to say "we" are all getting older. This problem is worse for someone who might go a long time between saw use, vs someone who runs a saw all the time.

Dad just gave me his farm use saw due to such 2 winters ago. Age and bad shoulder caught up to him.

It's gonna catch us all. Did you come up with an alternative for him? Soomething smaller and easier to start. My Dad is 90 and can still start the 350 I leave at his house. Some customers have gone the battery route. The little 120i runs with only the smallest gas saws, but it does more work than a saw that they can't get going. Keeps the guys out and active too.

A battery pole saw, easy start trim saw. Then if need 50cc and bigger, I go down with saws start saw for him and we both do work with 2 saws.
Enjoyed that this fall opening back up a old logging road together. At the end setting on a big log and just talking about things.

Standing on this old logging road on another hill I tried to take a pic across to other hill showing the log etc. Hard to tell on first to pics.

keravankolli · « **Reply #15 on:** September 06, 2020, 04:45:25 pm »

SOLUTION is here.

The problem is in the aging pull cord. As the cord is pulled the normal compression in the cylinder increases the resistive force which tightens the cord inside the wheel and it jams with the lower circle of the cord.

I just tore my Husky 44 into pieces, but it turned out that just replacing the cord fixed this. I had the exact same problem as described here, really easy to pull when the plug was removed, but when it is installed impossible to start the saw. This seems to be problem that can occur with many brand saws. No wonder the fix is quite general.

Spike60 · « **Reply #16 on:** September 06, 2020, 09:55:48 pm »

Yeah, sometimes the old cord can get so stiff it just doesn't work anymore. Did you replace the cord with the same size as what was in there? Could be that the cord was replaced with the wrong size at some point. What you describe about the cord jamming itself is most often due to a crackked starter pulley. Fairly common on 200 series saws like the 266. The pulley spreads were the crack is and allows the cord to double up and jam. Not good at retracting either.

Subject / Started by	Replies	Last post
starter cord wont recoil after starts Started by ugabulldog Husqvarna	6 Replies 477 Views	June 16, 2013, 08:56:25 am by Al Smith
041 Hard Starter Pull Started by BlackhorseVet « 1 2 » Stihl	14 Replies 979 Views	October 30, 2013, 08:41:27 pm by president
MS 250 Very hard to pull wont start!! Started by mastercraftka « 1 2 ... 8 9 » Stihl	80 Replies 4095 Views	February 13, 2014, 02:37:33 pm by mastercraftka
064 Hard Pull Question Started by blueberrymuzik « 1 2 » Stihl	10 Replies 914 Views	February 04, 2014, 03:24:19 pm by president
Cordless Drill powered pull starter Started by Cut4fun . « 1 2 » Tool Shed	15 Replies 4176 Views	February 28, 2017, 10:26:34 am by Cmtrey
CS380 pull cord assembly Started by Golvannon McCulloch	6 Replies 691 Views	February 07, 2016, 12:49:11 pm by Golvannon
McCullogh Mini Mac 30-cord hard to pull with spark plug in, easier to pull with spark plug out Started by PS85 McCulloch	9 Replies 981 Views	June 18, 2017, 08:25:10 pm by Al Smith
CS 4400 Very hard to pull. Started by Garfield43 « 1 2 » Echo	13 Replies 964 Views	October 13, 2017, 05:45:23 am by mountainlake
pull cord won't retract unless spark plug is out Started by dave1127 Husqvarna	0 Replies 225 Views	September 20, 2022, 07:57:34 pm by dave1127
Husky 435 Pull Cord Issue Started by dave1127 Husqvarna	1 Replies 226 Views	September 29, 2022, 07:10:36 am by pleasant

Chainsaw Repair

News:

Author Topic: Husqvarna 266SE starter cord very hard to pull. (Read 3423 times)

Spike60

Re: Husqvarna 266SE starter cord very hard to pull.

Cut4fun .

Re: Husqvarna 266SE starter cord very hard to pull.

3000 FPS

Re: Husqvarna 266SE starter cord very hard to pull.

Spike60

Re: Husqvarna 266SE starter cord very hard to pull.

Cut4fun .

Re: Husqvarna 266SE starter cord very hard to pull.

keravankolli

Re: Husqvarna 266SE starter cord very hard to pull.

Spike60

Re: Husqvarna 266SE starter cord very hard to pull.

Related Topics