Chainsaw Repair

Thats a new one for me. I would think the 555 560 562 would all have the same tensioner.

Thanks for sharing the info and welcome to the site.

Just reading on some of the updates on model.

1. New Crankshaft 575 54 52-14 with new ball bearings. New ball bearings with improved durability.
 
2. New Ball bearings 525 43 42-03 and 505 13 35-03 with improved durability.
 
3. New Crankcase, assy 575 38 02-17 with new ball bearings. The Clutch side of the crankcase is made of Aluminium, which will increase the durability.
 
4. New Screw 510 02 06-02 for oil pump. This screw has a Micro coating, Dri Loc added for sealing. This due to the screw holes for the oil pump goes straight through the new crankcase.
 
5. A New Clutch, assy kit 589 80 90-01 with increased lifetime has been introduced. This kit consists of Clutch, assy and an instruction.
 
The Old spring 580 65 35-02 can´t be used on the New Clutch 589 80 90-01. The New spring 502 16 4701 can´t be used on the Old Clutch 574 23 61-04.
 
6. A New Air filter, 505 12 63-07 has been introduced. This air filter has a new filter fabric with 25 µm. The new filter has an orange color. The filter has replaced the 44 µm filter on PNC:s 555: 966 01 00. 44 µm filter remains as spare part.

I was wrong on what I guessed it would fit above.

Lateral side adjust chain and bar adjuster tensioner assembly. 575 26 04-03, 575260403, 575 26 04-01, 575260401
 NEW
 Fits Jonsered CS 2252 2253 2260 2258 Turbo, CS2252 CS2253 CS2258 CS2260 Turbo. Husqvarna 545 550xp 550 555 455 460 Rancher