« previous next »
Pages: [1] 2   Go Down

Author Topic: UPDATE on Husqvarna 338XPT  (Read 1174 times)

0 Members and 1 Guest are viewing this topic.

Offline Giles

  • 6 cube
  • ****
  • Posts: 157
  • Karma: 12
  • Location: Florence Alabama
UPDATE on Husqvarna 338XPT
« on: June 10, 2016, 08:01:27 pm »
How do these bearings receive lubrication?
Logged

Share on Facebook Share on Twitter

Offline Giles

  • 6 cube
  • ****
  • Posts: 157
  • Karma: 12
  • Location: Florence Alabama
Husqvarna 338XPT Crankshaft Bearings
« Reply #1 on: June 11, 2016, 11:01:42 am »

Anytime I rebuild a two stroke, I lubricate all internal bearings.
 How do you pre-lube these bearings and how do they get lubricant? The rectangular holes, on crank side, do not go through.

I posted this on the other forum with zero response.
I have tried many times, following instructions, to post pictures on this site.
I gave up trying to post photos.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23929
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 338XPT Crank Bearings
« Reply #2 on: June 11, 2016, 11:18:19 am »
Pics look good to me.    ?
Logged

Offline Giles

  • 6 cube
  • ****
  • Posts: 157
  • Karma: 12
  • Location: Florence Alabama
Re: Husqvarna 338XPT Crank Bearings
« Reply #3 on: June 11, 2016, 11:26:35 am »
Quote from: Cut4fun . on June 11, 2016, 11:18:19 am
Pics look good to me.    ?

Please explain?
I saw no indication of photos in preview. Is that normal?
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23929
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 338XPT Crank Bearings
« Reply #4 on: June 11, 2016, 11:54:14 am »
Quote from: Giles on June 11, 2016, 11:26:35 am
Quote from: Cut4fun . on June 11, 2016, 11:18:19 am
Pics look good to me.    ?

Please explain?
I saw no indication of photos in preview. Is that normal?

Is this one of you pics?   You cant see your own pics in the post right now?

I see a bunch of these pics.

Logged

Offline Giles

  • 6 cube
  • ****
  • Posts: 157
  • Karma: 12
  • Location: Florence Alabama
Re: Husqvarna 338XPT Crank Bearings
« Reply #5 on: June 11, 2016, 11:59:21 am »
Yes ---I can sell all the photos I tried to post, but when I previewed the post, photos did not appear to have been uploaded?
Guess it might have something to do with my age---LOL !
Logged

Offline Giles

  • 6 cube
  • ****
  • Posts: 157
  • Karma: 12
  • Location: Florence Alabama
Re: Husqvarna 338XPT Crank Bearings
« Reply #6 on: June 11, 2016, 12:05:51 pm »
Cut4fun . --Do you have any idea how these bearings are lubricated? I have worked on two stroke engines for many years and have never seen anything like this. These seals are sold separately and they slide on bearing. It appears that the bearing may be sealed with lubricant, which does not make sense.
This saw had a broken piston skirt and was knocking. No indication of bad bearings, so I plan to reuse.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23929
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 338XPT Crank Bearings
« Reply #7 on: June 11, 2016, 12:07:11 pm »
Quote from: Giles on June 11, 2016, 11:59:21 am
Yes ---I can sell all the photos I tried to post, but when I previewed the post, photos did not appear to have been uploaded?
Guess it might have something to do with my age---LOL !

I'll have to check to make sure. But I think if you  embed the pics with software here it dosent preview pics in post.

Previews (guessing right now) only shows pics using outside host like photobucket etc. Plus the words typed to use spell check.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23929
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 338XPT Crank Bearings
« Reply #8 on: June 11, 2016, 12:08:41 pm »
Quote from: Giles on June 11, 2016, 12:05:51 pm
Cut4fun . --Do you have any idea how these bearings are lubricated? I have worked on two stroke engines for many years and have never seen anything like this. These seals are sold separately and they slide on bearing. It appears that the bearing may be sealed with lubricant, which does not make sense.
This saw had a broken piston skirt and was knocking. No indication of bad bearings, so I plan to reuse.

Never dealt with those bearings sorry.  Never had to do a 338  crank bearing yet.

Other sealed bearing types come lubed inside.
Logged

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4700
  • Karma: 216
  • OHIO REDNECK
Re: Husqvarna 338XPT Crank Bearings
« Reply #9 on: June 11, 2016, 12:15:55 pm »
Trying preview and embed pics software here.

Nope you cant see pics linked in preview. Using embedded pic software here.

Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
41 Replies
3321 Views 		Last post May 09, 2019, 07:07:16 pm
by HUSKY KEV
12 Replies
1288 Views 		Last post August 31, 2013, 07:28:45 pm
by 660magnum
24 Replies
1737 Views 		Last post October 23, 2014, 12:22:01 pm
by Cut4fun .
2 Replies
574 Views 		Last post October 27, 2013, 09:09:17 am
by brokenbudget
Crank Bearings

Started by farmboy « 1 2 » Husqvarna

10 Replies
900 Views 		Last post January 21, 2014, 02:30:55 pm
by 05_sprcrw
0 Replies
282 Views 		Last post January 11, 2014, 01:51:50 pm
by KilliansRedLeo
Crank bearings

Started by jmester « 1 2 » Stihl

12 Replies
923 Views 		Last post July 24, 2015, 07:14:47 pm
by 67L36Driver
4 Replies
797 Views 		Last post March 10, 2016, 11:06:21 am
by 660magnum
3 Replies
892 Views 		Last post March 18, 2016, 09:02:35 am
by Jason K
1 Replies
513 Views 		Last post August 05, 2022, 05:02:12 am
by DNX800