Author Topic: Husqvarna 346xp  (Read 3996 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21942
  • Karma: 530
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 346xp
« Reply #10 on: June 26, 2011, 02:29:17 pm »
44.7 x 32 on the 2 Stihls

50.23    817733

I am thinking the 5100S was either 50.4cc or 50.7cc I cant remember.
REDNECK Saw Repair Getter Done

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Husqvarna 346xp
« Reply #11 on: June 26, 2011, 02:45:35 pm »
5100 has a 45mm piston, don't know the stroke.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21942
  • Karma: 530
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 346xp
« Reply #12 on: June 26, 2011, 02:53:32 pm »
IF 5100 is 45 x 32 shows 50.91   477816393442   I always thought jonsered 590 was 45 x 32 and 50.7cc by their paper work specs. But calculator I use says 50.9.  ???
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 346xp
« Reply #13 on: June 30, 2011, 08:02:33 am »
IF 5100 is 45 x 32 shows 50.91   477816393442   I always thought jonsered 590 was 45 x 32 and 50.7cc by their paper work specs. But calculator I use says 50.9.  ???

I have allways believed the 590 and 2051 were 50.9cc, despite some statements saying 50.7 or 50.8.

Regarding the Dolmar, I have never seen any statements from Dolmar regarding the exact bore/stroke, but they have stated anything from 49.9 to 50.7 regarding the cc, depending on which document you are looking in.
My guess is that the bore is closer to 45 than it is to 44mm, and the stroke 32 - but the exact bore is an open question.....

I assume these saws are just over 50cc because of the way EPA rules works.

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Husqvarna 346xp
« Reply #14 on: June 30, 2011, 09:01:34 am »
IF 5100 is 45 x 32 shows 50.91   477816393442   I always thought jonsered 590 was 45 x 32 and 50.7cc by their paper work specs. But calculator I use says 50.9.  ???

I have allways believed the 590 and 2051 were 50.9cc, despite some statements saying 50.7 or 50.8.

Regarding the Dolmar, I have never seen any statements from Dolmar regarding the exact bore/stroke, but they have stated anything from 49.9 to 50.7 regarding the cc, depending on which document you are looking in.
My guess is that the bore is closer to 45 than it is to 44mm, and the stroke 32 - but the exact bore is an open question.....

I assume these saws are just over 50cc because of the way EPA rules works.

IPL's for the 5100 list 2 pistons, 45mm for the 5100 and 43mm for the 4600

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 346xp
« Reply #15 on: June 30, 2011, 04:00:42 pm »
IF 5100 is 45 x 32 shows 50.91   477816393442   I always thought jonsered 590 was 45 x 32 and 50.7cc by their paper work specs. But calculator I use says 50.9.  ???

I have allways believed the 590 and 2051 were 50.9cc, despite some statements saying 50.7 or 50.8.

Regarding the Dolmar, I have never seen any statements from Dolmar regarding the exact bore/stroke, but they have stated anything from 49.9 to 50.7 regarding the cc, depending on which document you are looking in.
My guess is that the bore is closer to 45 than it is to 44mm, and the stroke 32 - but the exact bore is an open question.....

I assume these saws are just over 50cc because of the way EPA rules works.

IPL's for the 5100 list 2 pistons, 45mm for the 5100 and 43mm for the 4600
  Yes, but that could be rounded off numbers???   ???

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Husqvarna 346xp
« Reply #16 on: June 30, 2011, 04:18:22 pm »
Your right, it is 44.9978987658898898899888776677899998977678898876778898877666678887876777888777888776677888766778776656677788898876778899889999899989999889998889999988999999.

Close as I could get, no more numbers on my digital calipers.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 346xp
« Reply #17 on: June 30, 2011, 08:03:48 pm »
Your right, it is 44.9978987658898898899888776677899998977678898876778898877666678887876777888777888776677888766778776656677788898876778899889999899989999889998889999988999999.

Close as I could get, no more numbers on my digital calipers.

Could be - who really knows?    ;D

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Husqvarna 346xp
« Reply #18 on: June 30, 2011, 08:13:24 pm »
Your right, it is 44.9978987658898898899888776677899998977678898876778898877666678887876777888777888776677888766778776656677788898876778899889999899989999889998889999988999999.

Close as I could get, no more numbers on my digital calipers.

Could be - who really knows?    ;D

The man with one in his hand, thats who knows.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21942
  • Karma: 530
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 346xp
« Reply #19 on: June 30, 2011, 08:32:07 pm »
Looks like 45mm to me. All mine read just  under too.  ;)
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
910 Views
Last post March 02, 2011, 09:12:47 pm
by Cut4fun
4 Replies
822 Views
Last post February 08, 2012, 04:48:11 pm
by SawTroll
0 Replies
1264 Views
Last post February 05, 2013, 05:02:27 pm
by Cut4fun .
1 Replies
271 Views
Last post October 06, 2013, 01:26:57 pm
by Cut4fun .
12 Replies
1167 Views
Last post October 08, 2013, 01:40:04 pm
by Cut4fun
13 Replies
498 Views
Last post November 02, 2013, 12:01:50 pm
by Cut4fun
4 Replies
369 Views
Last post February 14, 2014, 04:10:00 pm
by Cut4fun .
10 Replies
1067 Views
Last post November 22, 2013, 02:41:13 pm
by Cut4fun
33 Replies
1141 Views
Last post January 20, 2017, 07:31:32 pm
by Cut4fun .
8 Replies
277 Views
Last post February 11, 2017, 09:41:39 pm
by jmester