« previous next »
Pages: 1 2 3 4 5 6 [7] 8 9 10 11   Go Down

Author Topic: Husqvarna 353  (Read 8887 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 353
« Reply #60 on: April 25, 2015, 11:44:57 am »
Cleaned and test fit everything. The pump part fits so tight into the 1 piece rubber part.  Made sure the 2 pump bolts were snug good.
Put back together and tested by warming up saw and set to see how bad it leaks.  Could see seeping started in the time it took to hand sharpen a chain.

Have pics just not uploaded yet.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 353
« Reply #61 on: April 25, 2015, 11:52:45 am »
I'm following this for I redid everything in my 2006 7900 and it didn't change the leak at all.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 353
« Reply #62 on: April 25, 2015, 11:55:30 am »
Quote from: 660magnum on April 25, 2015, 11:52:45 am
I'm following this for I redid everything in my 2006 7900 and it didn't change the leak at all.

Did you try a new seal part?  I dont want to just waste the guys $$ if it isnt going to fix it.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 353
« Reply #63 on: April 25, 2015, 12:01:40 pm »
The 7900 is made different from a 350. I rebuilt the pump and replaced all the rubber with the green pieces.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 353
« Reply #64 on: April 25, 2015, 12:03:08 pm »
Quote from: 660magnum on April 25, 2015, 12:01:40 pm
The 7900 is made different from a 350. I rebuilt the pump and replaced all the rubber with the green pieces.

I dont remember how they were. I do remember them doing some update though.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 353
« Reply #65 on: April 25, 2015, 12:23:23 pm »
The 7900 will leak where the pickup tube goes into the oil tank. There is a molded double lip connector on the tube. It will leak around the lips.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 353
« Reply #66 on: April 25, 2015, 04:40:21 pm »
Going by online for sale pics this should be 2 parts. But dang the molded seem line goes right down through both as if one single part.  I tried to separate but didnt want to rip anything.  :o

When just setting. I swear it is leaking right out of the oiler hole, then it just run down the metal bar cover and out the seem at bottom of cover and crankcase meet.   Just the way it is designed.   ???







Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 353
« Reply #67 on: April 25, 2015, 04:54:31 pm »
The number on the part above comes back to 2147 2152 etc too.  503854701


https://www.partstree.com/parts/jonsered/saws-chainsaw/cs2152-jonsered-chainsaw-2002-09/clutch-oil-pump/





Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 353
« Reply #68 on: April 25, 2015, 05:14:15 pm »
I just dont see where a new part is going to stop this leaking.  Watcha say?
Logged

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Husqvarna 353
« Reply #69 on: April 25, 2015, 06:28:45 pm »
Is the breather open?
Logged
Pages: 1 2 3 4 5 6 [7] 8 9 10 11   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
2 Replies
511 Views 		Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
7 Replies
905 Views 		Last post January 31, 2016, 12:49:24 pm
by 660magnum
0 Replies
259 Views 		Last post March 30, 2016, 07:10:38 pm
by mikehonda
4 Replies
512 Views 		Last post April 12, 2016, 06:30:34 pm
by dannyupsolate
4 Replies
616 Views 		Last post November 07, 2016, 05:46:56 pm
by oldpro
2 Replies
550 Views 		Last post May 15, 2016, 04:59:09 am
by Eccentric
20 Replies
2122 Views 		Last post March 21, 2018, 10:47:30 am
by Cut4fun .
4 Replies
563 Views 		Last post November 23, 2016, 02:23:26 am
by georgehopson
1 Replies
348 Views 		Last post October 26, 2016, 03:40:28 pm
by Eccentric
0 Replies
494 Views 		Last post January 16, 2017, 03:40:49 pm
by HolmenTree