Chainsaw Repair

The difference is the transfer covers on the 365 X-Torq?

They have a different part number from the ones on the 372XT but are not available separately.

It is said that you can see the difference through the spark plug holes.

You must have read the same thing I just read below.

Both the 365 and 372 have the same cylinder. They both have the same Husky part# stamped onto the cylinder on the flywheel side 5219301. The difference is the port covers on the side. There is a baffle in the 365 cover where as the 372 port is totally open. I haven't taken one of the 365 port covers off but you can see it through the plug hole and the casting # for the port covers are different. Hope this eliminates some confusion.

True or not? Somebody got a 365xt 372xt to check?