Author Topic: Husqvarna 372xp  (Read 8152 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #20 on: March 31, 2011, 06:34:59 pm »
I still dont see why a 2171 cant play too, same dang saw as 372xp  ???.

Heck even hybridized 2171 crankcase with all orange besides the crankcase is a 372 to me and it already has a stock 50mm on it.    Dont matter to me anyhow. I was just going to send saws to guys to use with 50mm tops.  No biggie, they can set right back on the shelves  ;D.



REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 372xp
« Reply #21 on: March 31, 2011, 07:17:38 pm »
I think the 365s will be ok. Just needs to be a 50mm topend.
  Unless it has the smaller capasity Zama carb that many of them came with.

Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29
Re: Husqvarna 372xp
« Reply #22 on: March 31, 2011, 08:32:52 pm »
I think I'm going to get in on the porting fun too, I've gotta make a couple calls to see if I can scrounge up a pile of parts to make into a 372/371/2171/362/365/2071/2163 saw. It should be interesting to see what sort of stuff shows up at that GTG.

Offline mdavlee

  • 5 cube
  • ***
  • Posts: 138
  • Karma: 4
Re: Husqvarna 372xp
« Reply #23 on: March 31, 2011, 08:38:10 pm »
Yeah I think I might have found a 372 local for a good price and join in the fun myself.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #24 on: March 31, 2011, 09:20:15 pm »
I think I'm going to get in on the porting fun too, I've gotta make a couple calls to see if I can scrounge up a pile of parts to make into a 372/371/2171/362/365/2071/2163 saw. It should be interesting to see what sort of stuff shows up at that GTG.

Sounds like Terry changed his mind and letting Jreds 2165 2171 2071 etc and 365 etc in long as 50mm bore.  8) 8)   

tlandrum2002  = folks i dont mind if you use 365 371xp 372xp 372xpw bottom ends or the jred counter parts as long as nobody whines about all the saws not being the same. but you must use the 50mm cylinder with the apprpriate intake and carb for the 372xp all other rules being in effect concerning how you build it. i said from post #1 that rules were subject to change. so by all means run whatch u brung. im not trying to exclude anyone,hell this is for fun and bragging rights. and for people to really be able to get a feal for the differences in how perticular builders do things. not looking under the hood,just seat of the pants differences.
REDNECK Saw Repair Getter Done

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
Re: Husqvarna 372xp
« Reply #25 on: April 01, 2011, 06:34:00 pm »
where and when is this build happening?

David

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #26 on: April 01, 2011, 06:38:39 pm »
June 18th in TN is the gtg.   People can send saws in to Terry and must run spark screens and 24" 3/8 050 84DL stock chains.

PM sent with additional info.
REDNECK Saw Repair Getter Done

Offline firefighter33

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Re: Husqvarna 372xp
« Reply #27 on: April 01, 2011, 09:29:44 pm »
Guys asking me for a 50mm 372. I have plenty but hard to conform to the rules that have been set.
Some of my saws have red in them, some have 362 365 tags, some have BB on 372 and 372xpg tags, some are already ported. But I do have plenty of 50mm stock tops and crankcases they could go on. Just replace the tags with a 372xp tag.  Husky tags are known to come off and get lost.  ;)

Few I have left.




PM sent.

Offline mdavlee

  • 5 cube
  • ***
  • Posts: 138
  • Karma: 4
Re: Husqvarna 372xp
« Reply #28 on: April 01, 2011, 09:40:52 pm »
I got me a nice one local. It's almost brand new. I really doubt it's broke in.

Offline firefighter33

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Re: Husqvarna 372xp
« Reply #29 on: April 01, 2011, 09:42:24 pm »
Thanks cut4fun

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1155 Views
Last post February 21, 2012, 09:43:13 am
by mweba
32 Replies
988 Views
Last post March 26, 2013, 02:48:36 pm
by UNCLEBEEF
5 Replies
333 Views
Last post September 14, 2013, 11:32:12 am
by turbo885
7 Replies
644 Views
Last post October 23, 2013, 10:49:55 pm
by Walt
14 Replies
1142 Views
Last post December 22, 2013, 06:21:33 am
by brokenbudget
17 Replies
389 Views
Last post January 29, 2015, 10:28:10 am
by Spike60
15 Replies
399 Views
Last post September 07, 2015, 06:40:03 pm
by Cut4fun .
6 Replies
416 Views
Last post December 06, 2016, 08:09:47 am
by wild262
2 Replies
90 Views
Last post May 07, 2018, 02:36:08 pm
by Cut4fun .
8 Replies
369 Views
Last post January 05, 2019, 09:48:58 am
by trappermike