Author Topic: Husqvarna 372xp  (Read 8243 times)

0 Members and 0 Guests are viewing this topic.

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1375
  • Karma: 192
  • Location: Manitoba Canada
Re: Husqvarna 372xp
« Reply #70 on: June 07, 2012, 11:29:42 pm »
Thanks for the info guys, I'll love my 372 alot more when I get that chain seizing eliminated.
Making a living with a saw since age 16.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 372xp
« Reply #71 on: June 08, 2012, 09:58:49 pm »
wide  537331001

I had bought some covers from Outlaw at one time and these are his pics.

My 372xpg isn't an ideal noodler with the stock cover, so I have to get one of those I guess, to see if it helps.  ;)

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1375
  • Karma: 192
  • Location: Manitoba Canada
Re: Husqvarna 372xp
« Reply #72 on: June 08, 2012, 11:42:38 pm »
Quote from: Cut4fun2 link to talk topic=3.msg9657#msg9657 date=1339080693
wide  537331001

I had bought some covers from Outlaw at one time and these are his pics.
372xpg isn't an ideal noodler with the stock cover, so I have to get one of those I guess, to see if it helps.  ;)
Hello Niko its good to talk to you again. Yes I have proven to myself that my 272XP noodles much better with its outboard clutch then my inboard 372XP.
Making a living with a saw since age 16.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 372xp
« Reply #73 on: June 14, 2012, 04:17:08 pm »
The design of the chain adjuster on the 372xp may be a larger issue regarding noodling than the inboard clutch - just a thought, but it has been "rotating" in my mind for several years..... ;D

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1375
  • Karma: 192
  • Location: Manitoba Canada
Re: Husqvarna 372xp
« Reply #74 on: June 15, 2012, 10:40:00 am »
The design of the chain adjuster on the 372xp may be a larger issue regarding noodling than the inboard clutch - just a thought, but it has been "rotating" in my mind for several years..... ;D
  Well I gotta say the superior balance and handling of the 272XP far out weighs what little disadvantage it's front mount adjuster screw offers.
 Come to think about it my 2009 395XP's front screw works just fine or Husqvarna would have changed that if it was a problem.
 ;)
Making a living with a saw since age 16.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Husqvarna 372xp
« Reply #75 on: June 16, 2012, 12:08:45 pm »
Well, the main differences between the 371 and 372 was the side adjuster and beefier case on the 372 - that adjuster is not one of the great features of the 372, more like an afterthought - but it works surpricingly well ,considering that.... ;D

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 372xp
« Reply #76 on: June 24, 2012, 08:50:06 pm »
Took one of the 372's out in the yard at the house today and after adjusting the carb, I used it to prune a few limbs in a Silver maple, a pin oak, and a blue spruce. Lifting it up high with that 24" bar is a killer for me. Not my pick of a pruning chainsaw.

I wanted to give it a little exercise as it has had a new ring in it recently and has not been used. I figure when I get ready to really use it that it will be used hard.

I cleaned it up and put it away.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #77 on: June 24, 2012, 09:04:45 pm »

I wanted to give it a little exercise as it has had a new ring in it recently and has not been used. I figure when I get ready to really use it that it will be used hard.



I'm going to need another truck load of wood. Say somewhere between this Sat and next Sat.  You game?
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 372xp
« Reply #78 on: June 24, 2012, 09:22:50 pm »
LMK when you want to go.

Sometime this week I need to take the log splitter over there so we will have to work around that.

That 372 is running mighty good
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #79 on: June 28, 2012, 03:04:18 pm »
Just realized I have no stock 372's left.

 Time to get my parts needed list together and get the parts off the shelf and out of the box.  Maybe I should  put a green gas cap on it just to mess with ones mind.  ;) :D ;D

Before putting in box and stored away.

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1159 Views
Last post February 21, 2012, 09:43:13 am
by mweba
32 Replies
1001 Views
Last post March 26, 2013, 02:48:36 pm
by UNCLEBEEF
5 Replies
334 Views
Last post September 14, 2013, 11:32:12 am
by turbo885
7 Replies
652 Views
Last post October 23, 2013, 10:49:55 pm
by Walt
14 Replies
1166 Views
Last post December 22, 2013, 06:21:33 am
by brokenbudget
17 Replies
393 Views
Last post January 29, 2015, 10:28:10 am
by Spike60
15 Replies
407 Views
Last post September 07, 2015, 06:40:03 pm
by Cut4fun .
6 Replies
421 Views
Last post December 06, 2016, 08:09:47 am
by wild262
2 Replies
93 Views
Last post May 07, 2018, 02:36:08 pm
by Cut4fun .
8 Replies
385 Views
Last post January 05, 2019, 09:48:58 am
by trappermike