Author Topic: Husqvarna 372xp  (Read 8186 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #80 on: July 10, 2012, 03:08:33 pm »
Just piddling here and there with this 372 project.

Like new piston and cylinder with crosshatch and witness lines still. Like new crankshaft etc. I just hope it runs as good as the last 372 50mm I did.

Need a bunch of little stuff if any has any to get rid of or trade. Just let me know. I'll post in wanted a list later.


REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 372xp
« Reply #81 on: July 11, 2012, 08:51:12 pm »
LMK when you want me to bring my 365 Special over and we will look at how the tank vent is done with the loop up through the air box floor and pull the clutch bell and look at the worm arm. We will try to determine the other late model differences too.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #82 on: July 21, 2012, 05:41:55 pm »
Well I just couldnt wait any longer for the 2 parts I have ordered on such a nice day and a little free time. I stole the intake flange and intake sleeve from the 362xp and put on this latest 372xp project.

660mag had just stopped by when I was buttoning  it up and fired it  to tune and stick in a test piece of black walnut. Feels like another good runner.  8) ;D
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 372xp
« Reply #83 on: July 21, 2012, 06:21:40 pm »
It ran pretty good when I was there.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Husqvarna 372xp
« Reply #84 on: July 25, 2012, 03:47:19 pm »
Finally found a large mount husky 20" Germany made Carlton bar for my last 372,  like the small mount one for my 362. 

Left small mount 362. Right large mount 372.

REDNECK Saw Repair

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1375
  • Karma: 191
  • Location: Manitoba Canada
Re: Husqvarna 372xp
« Reply #85 on: July 25, 2012, 06:22:58 pm »
Finally found a large mount husky 20" Germany made Carlton bar for my last 372,  like the small mount one for my 362. 

Left small mount 362. Right large mount 372.

I got a couple of those bars too Kevin, got them from Baileys real cheap. But look close at the bar nose joint and you will probably see where the bar was ground down to match the tip, probably why they blew them out cheap.
Making a living with a saw since age 16.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #86 on: July 25, 2012, 06:44:35 pm »
You must have got some seconds or something that was being clearanced out IMO. All of my 050 bars have been perfect, no grinding to fit anywhere.  Very Nice fit and finish.  8)

I have looked for what you said on all my Carlton bars German made, Japan made. GB made and I cant find any grinding  ???

I wish I could have found the husky mounts cheap I would have bought all the lg and sm I could afford.
REDNECK Saw Repair Getter Done

Offline Axlerod74

  • 3 cube
  • *
  • Posts: 8
  • Karma: 1
  • Location: East KY
Re: Husqvarna 372xp
« Reply #87 on: July 26, 2012, 03:23:10 pm »
I could help you out with another one of the small mount 20" Carlton bars.   8)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 372xp
« Reply #88 on: July 26, 2012, 03:25:01 pm »
I could help you out with another one of the small mount 20" Carlton bars.   8)

050 or 058 ?
REDNECK Saw Repair Getter Done

Offline Axlerod74

  • 3 cube
  • *
  • Posts: 8
  • Karma: 1
  • Location: East KY
Re: Husqvarna 372xp
« Reply #89 on: July 26, 2012, 03:25:25 pm »
Is that one of the earlier open port saws?  Looks like a bolt on intake.

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1157 Views
Last post February 21, 2012, 09:43:13 am
by mweba
32 Replies
992 Views
Last post March 26, 2013, 02:48:36 pm
by UNCLEBEEF
5 Replies
333 Views
Last post September 14, 2013, 11:32:12 am
by turbo885
7 Replies
649 Views
Last post October 23, 2013, 10:49:55 pm
by Walt
14 Replies
1152 Views
Last post December 22, 2013, 06:21:33 am
by brokenbudget
17 Replies
389 Views
Last post January 29, 2015, 10:28:10 am
by Spike60
15 Replies
399 Views
Last post September 07, 2015, 06:40:03 pm
by Cut4fun .
6 Replies
418 Views
Last post December 06, 2016, 08:09:47 am
by wild262
2 Replies
91 Views
Last post May 07, 2018, 02:36:08 pm
by Cut4fun .
8 Replies
373 Views
Last post January 05, 2019, 09:48:58 am
by trappermike