Author Topic: Husqvarna 372  (Read 14832 times)

0 Members and 82 Guests are viewing this topic.

Offline blsnelling

  • 4 cube
  • **
  • Posts: 58
  • Karma: 7

  • Total Badges: 22
    Badges: (View All)
    Apple User Level 5 Avatar Karma Good 50 Posts Fourth year Anniversary
Re: Husqvarna 372xp
« Reply #10 on: February 26, 2011, 01:53:52 pm »
Use some really nasty solvents and give it some good heating to burn out as much oil as possible before applying whatever sealant.

One possible to use in a fine crack like this is Locktite. Seap it in and seal with some tape for a while, Locktite hardens from lack of air.
What concerns me about this crack is that it's in the bar mount area and sees some stresses.  I'm not sure you'd want to split the cases, but the best fix would be from inside.  Drill small holes at both ends of the crack, bevel the crack a little, rough up real good around it, and then JBWeld it.  I did a similiar repair to a 015 and my BIL is still using it.

Offline jamming

  • 4 cube
  • **
  • Posts: 44
  • Karma: 1
  • Location: Diablo, wa

  • Total Badges: 13
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Combination Topic Starter
Re: Husqvarna 372xp
« Reply #11 on: February 26, 2011, 02:51:17 pm »
Be sure and post how you fixed this or didnt, would really be curious !
I drives me boat my wife drives me dingy

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Husqvarna 372xp
« Reply #12 on: February 26, 2011, 03:14:36 pm »
Be sure and post how you fixed this or didnt, would really be curious !

It's going to be awhile ok, it is very low on priority list right now.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Husqvarna 372xp
« Reply #13 on: March 20, 2011, 02:38:55 pm »
my new toy ;) 20'' bar with stihl RSC chain
Ron

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Husqvarna 372xp
« Reply #14 on: March 20, 2011, 03:29:08 pm »
Appears to be woods ported  cutting like that  :o

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Husqvarna 372xp
« Reply #15 on: March 20, 2011, 05:40:40 pm »
i think it may have had a little work done to it. ;)
Ron

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Husqvarna 372xp
« Reply #16 on: March 20, 2011, 06:21:01 pm »
i think it may have had a little work done to it. ;)

Your work or who's? 

It sounds like one of 2 porters who's 372's sound like that. The one used to port for the other till the other starting porting for himself. Both goooood builders.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Husqvarna 372xp
« Reply #17 on: March 20, 2011, 06:34:47 pm »
Definitely not my work. Thats a Dan Henry build.
Ron

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Husqvarna 372xp
« Reply #18 on: March 31, 2011, 05:51:14 pm »
Guys asking me for a 50mm 372. I have plenty but hard to conform to the rules that have been set.
Some of my saws have red in them, some have 362 365 tags, some have BB on 372 and 372xpg tags, some are already ported. But I do have plenty of 50mm stock tops and crankcases they could go on. Just replace the tags with a 372xp tag.  Husky tags are known to come off and get lost.  ;)

Few I have left.


Offline mdavlee

  • 5 cube
  • ***
  • Posts: 138
  • Karma: 4

  • Total Badges: 19
    Badges: (View All)
    Third year Anniversary Karma Second year Anniversary Level 4 Linux User Mobile User
Re: Husqvarna 372xp
« Reply #19 on: March 31, 2011, 06:25:44 pm »
I think the 365s will be ok. Just needs to be a 50mm topend.

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
983 Views
Last post April 09, 2011, 09:18:24 pm
by Cut4fun .
185 Replies
28148 Views
Last post November 15, 2021, 11:42:49 am
by Cut4fun .
15 Replies
2563 Views
Last post December 15, 2013, 11:46:24 am
by KilliansRedLeo
2 Replies
648 Views
Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
226 Replies
15500 Views
Last post July 11, 2021, 04:54:40 pm
by Cut4fun .
0 Replies
1004 Views
Last post November 26, 2016, 02:35:22 pm
by weimedog
0 Replies
389 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
104 Replies
9144 Views
Last post October 19, 2023, 01:33:19 pm
by Cut4fun
8 Replies
744 Views
Last post June 05, 2021, 07:45:52 am
by Cut4fun
0 Replies
406 Views
Last post October 24, 2021, 07:19:33 am
by Cut4fun .