Author Topic: Husqvarna 372  (Read 14826 times)

0 Members and 38 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Husqvarna 372xp
« Reply #20 on: March 31, 2011, 06:34:59 pm »
I still dont see why a 2171 cant play too, same dang saw as 372xp  ???.

Heck even hybridized 2171 crankcase with all orange besides the crankcase is a 372 to me and it already has a stock 50mm on it.    Dont matter to me anyhow. I was just going to send saws to guys to use with 50mm tops.  No biggie, they can set right back on the shelves  ;D.




Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

  • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Husqvarna 372xp
« Reply #21 on: March 31, 2011, 07:17:38 pm »
I think the 365s will be ok. Just needs to be a 50mm topend.
  Unless it has the smaller capasity Zama carb that many of them came with.

Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29

  • Total Badges: 19
    Badges: (View All)
    Fifth year Anniversary Fourth year Anniversary Karma Good Level 4 Third year Anniversary Karma
Re: Husqvarna 372xp
« Reply #22 on: March 31, 2011, 08:32:52 pm »
I think I'm going to get in on the porting fun too, I've gotta make a couple calls to see if I can scrounge up a pile of parts to make into a 372/371/2171/362/365/2071/2163 saw. It should be interesting to see what sort of stuff shows up at that GTG.

Offline mdavlee

  • 5 cube
  • ***
  • Posts: 138
  • Karma: 4

  • Total Badges: 19
    Badges: (View All)
    Third year Anniversary Karma Second year Anniversary Level 4 Linux User Mobile User
Re: Husqvarna 372xp
« Reply #23 on: March 31, 2011, 08:38:10 pm »
Yeah I think I might have found a 372 local for a good price and join in the fun myself.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Husqvarna 372xp
« Reply #24 on: March 31, 2011, 09:20:15 pm »
I think I'm going to get in on the porting fun too, I've gotta make a couple calls to see if I can scrounge up a pile of parts to make into a 372/371/2171/362/365/2071/2163 saw. It should be interesting to see what sort of stuff shows up at that GTG.

Sounds like Terry changed his mind and letting Jreds 2165 2171 2071 etc and 365 etc in long as 50mm bore.  8) 8)   

tlandrum2002  = folks i dont mind if you use 365 371xp 372xp 372xpw bottom ends or the jred counter parts as long as nobody whines about all the saws not being the same. but you must use the 50mm cylinder with the apprpriate intake and carb for the 372xp all other rules being in effect concerning how you build it. i said from post #1 that rules were subject to change. so by all means run whatch u brung. im not trying to exclude anyone,hell this is for fun and bragging rights. and for people to really be able to get a feal for the differences in how perticular builders do things. not looking under the hood,just seat of the pants differences.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16

  • Total Badges: 22
    Badges: (View All)
    Sixth year Anniversary Level 5 Fifth year Anniversary 100 Posts Fourth year Anniversary Karma Good
Re: Husqvarna 372xp
« Reply #25 on: April 01, 2011, 06:34:00 pm »
where and when is this build happening?

David

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Husqvarna 372xp
« Reply #26 on: April 01, 2011, 06:38:39 pm »
June 18th in TN is the gtg.   People can send saws in to Terry and must run spark screens and 24" 3/8 050 84DL stock chains.

PM sent with additional info.

Offline firefighter33

  • pruner
  • *
  • Posts: 2
  • Karma: 0

  • Total Badges: 6
    Badges: (View All)
    Level 2 Third year Anniversary Second year Anniversary Level 1 First Post One year Anniversary
Re: Husqvarna 372xp
« Reply #27 on: April 01, 2011, 09:29:44 pm »
Guys asking me for a 50mm 372. I have plenty but hard to conform to the rules that have been set.
Some of my saws have red in them, some have 362 365 tags, some have BB on 372 and 372xpg tags, some are already ported. But I do have plenty of 50mm stock tops and crankcases they could go on. Just replace the tags with a 372xp tag.  Husky tags are known to come off and get lost.  ;)

Few I have left.




PM sent.

Offline mdavlee

  • 5 cube
  • ***
  • Posts: 138
  • Karma: 4

  • Total Badges: 19
    Badges: (View All)
    Third year Anniversary Karma Second year Anniversary Level 4 Linux User Mobile User
Re: Husqvarna 372xp
« Reply #28 on: April 01, 2011, 09:40:52 pm »
I got me a nice one local. It's almost brand new. I really doubt it's broke in.

Offline firefighter33

  • pruner
  • *
  • Posts: 2
  • Karma: 0

  • Total Badges: 6
    Badges: (View All)
    Level 2 Third year Anniversary Second year Anniversary Level 1 First Post One year Anniversary
Re: Husqvarna 372xp
« Reply #29 on: April 01, 2011, 09:42:24 pm »
Thanks cut4fun

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
981 Views
Last post April 09, 2011, 09:18:24 pm
by Cut4fun .
185 Replies
28139 Views
Last post November 15, 2021, 11:42:49 am
by Cut4fun .
15 Replies
2562 Views
Last post December 15, 2013, 11:46:24 am
by KilliansRedLeo
2 Replies
647 Views
Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
226 Replies
15489 Views
Last post July 11, 2021, 04:54:40 pm
by Cut4fun .
0 Replies
1004 Views
Last post November 26, 2016, 02:35:22 pm
by weimedog
0 Replies
389 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
104 Replies
9141 Views
Last post October 19, 2023, 01:33:19 pm
by Cut4fun
8 Replies
742 Views
Last post June 05, 2021, 07:45:52 am
by Cut4fun
0 Replies
406 Views
Last post October 24, 2021, 07:19:33 am
by Cut4fun .