Chainsaw Repair

Another member got 1

Husqvarna 372xpW 375K 51.4mm piston  ( not all W saws are 51.4 piston so check )

503 97 61-71  503976171

The OE 372xp we used to be able to buy. We can still get them from overseas shipped in by plane for 800 PHO half wrap and low top. Sweden made.

One friend has 2020 ones and this local I hooked up with shipper has a 2016.


Other pic how they come to shipped.

Yes you can still buy the good old edition 372's from across the pond. I just had to try another farmertec 372 in the upgraded white ones. Come with meteor piston, caber ring, walbro carb etc. Cylinders plated by meteor. They even come with the tiny o-ring that oem installed it it's saws. They can even be bought with the full wrap that is thick and strong like the oem handles now.
I have a smaller muffler mod on this one through bracket. The owner of the oem 372 used a muffler from a ported 365 on it for testing and much bigger exit. About 400 shipped for the white ones.

They have come a long way since the blue orange regular farmertec 372's. They were just a let down to me stock and I wouldnt even offer those local to folks myself. The ones I was getting in was only pulling 110psi - 118psi. Some would run right being they came missing the tiny o-ring. Some ran fine without but some dont. So I installed them myself.

But anyhow the white copy felt just like the oem handling etc and build right on par. In the wood the oem is just snappier like mad hornet and stronger with 24" buried in pin oak. Add this here too. Both saws only on 2nd tanks.

Inside pics from a US dealer. Mine looked the same.

Always fun wheeling, dealing and trading saws, parts, bars, chains etc etc. All party’s happy. 😎✌️🍺
2016 OE 372xp mahle topend. 372 just getting ready to start 3rd tank.
2021 490 that been ported. Was told maybe 20 tanks so far.

Switched 372 back to how it was shipped. Pulled the high top stuff off. Took the big dawgs and full wrap off. Back to low top and small inner dawg with half wrap.

Put my afm muffler I did for other saw on it so he could have the big piped muffler he had on it back.