Author Topic: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad  (Read 1512 times)

0 Members and 0 Guests are viewing this topic.

Offline pizbrewin

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« on: August 15, 2014, 09:23:01 am »
Hi All, Both of my saws leak out the bar oil when not in use. I mean it's bad - all of it leaks out and I have a huge oil puddle on my garage floor. Anyone else have this problem? Is there a fix? I tried leaving the saws in different positions and with the oil cap a bit loose and still no luck. Thanks in advance!!! If I can't get this fixed I'm going to sell these saws and go Stihl.

Share on Facebook Share on Twitter


Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #1 on: August 15, 2014, 09:51:05 am »
Check the oil lines going to the pump, on both saws.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #2 on: August 15, 2014, 10:10:50 am »
I've seen Stihl saws settin with a puddle of oil under them too...

Pull the clutches, remove the plate covering the oil pump and have a look. Post pics if you don't see anything obvious.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23989
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #3 on: August 15, 2014, 12:12:18 pm »
I've had stihl and dolmar marking their territory too.  Just a saw thing, not a maker thing.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4708
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #4 on: August 15, 2014, 07:24:40 pm »
I have a 455 and it leaks a little bit but not big puddles.   But I always drain my saws of oil when letting them sit because they all do it.
PP 505, 475, 445.

Offline pizbrewin

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #5 on: August 18, 2014, 01:50:38 pm »
OK, I'll check the lines and pumps. If I don't find anything I'll just drain the oil after each use. Thanks guys!!!

Offline wisewelding

  • pruner
  • *
  • Posts: 3
  • Karma: 0
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #6 on: November 15, 2014, 03:45:30 pm »
Look under the saw behind the sprocket / clutch.  you will see a screw slot to place the screwdriver turn it left or right. It will increase or decrease the oil flow. But seeing oil is a good sign that your bar is getting enough oil . And little oil you have a risk of overheating the bar...   

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #7 on: November 15, 2014, 04:31:57 pm »
Most of mine leak a little oil. Some leak a lot.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline snoozeys

  • 3 cube
  • *
  • Posts: 17
  • Karma: 1
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #8 on: November 15, 2014, 08:59:12 pm »
2 of mine leak oil ... seems most saws leak oil if only a tiny bit

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4708
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Husqvarna 41 and 455 Rancher Both Leak Bar Oil Bad
« Reply #9 on: November 15, 2014, 10:00:21 pm »
2 of mine leak oil ... seems most saws leak oil if only a tiny bit

+1 I agree.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1530 Views
Last post August 25, 2013, 04:43:37 pm
by 660magnum
4 Replies
1035 Views
Last post May 29, 2018, 07:10:01 am
by Cut4fun .
5 Replies
578 Views
Last post June 09, 2016, 12:43:45 pm
by Cut4fun .
5 Replies
698 Views
Last post November 15, 2016, 08:11:48 pm
by 3000 FPS
11 Replies
1982 Views
Last post June 08, 2017, 12:33:19 pm
by lowvirtualmemory
1 Replies
503 Views
Last post June 26, 2018, 07:45:18 pm
by Cut4fun .
1 Replies
450 Views
Last post April 01, 2020, 08:41:57 am
by Cut4fun .
2 Replies
496 Views
Last post August 23, 2019, 09:30:07 pm
by ray benson
4 Replies
766 Views
Last post October 01, 2020, 12:40:03 pm
by Spike60
17 Replies
2710 Views
Last post June 28, 2022, 07:41:59 am
by pleasant