« previous next »
Pages: [1] 2   Go Down

Author Topic: Husqvarna 435  (Read 1114 times)

0 Members and 25 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23730
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

    • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Husqvarna 435
« on: May 13, 2013, 05:07:37 pm »
I was impressed with the little husky 435 with 325 semi chisel I got to test and tune today.   8)


Specifications for 435
Engine specification Cylinder displacement    40.9 cc
Power output    2.2 hp
Maximum power speed    9000 rpm
Maximum recommended engine speed    13000 rpm
Fuel tank volume    12.51 fl oz
Fuel consumption    652 g/kWh
Idling speed    2900 rpm
Spark plug    Champion RCJ7Y, NGK BPMR7A, Husqvarna HQT-1
Electrode gap    0.02 "
Torque, max.    2 Nm/6300 rpm
Lubricants Oil tank volume    0.5 US pint
Oil pump type    Fixed flow
Oil pump capacity    13-13 ml/min
Vibration & noise data Equivalent vibration level (ahv, eq) front / rear handle    2.5/3.2 m/sē
Sound pressure level at operators ear    102 dB(A)
Sound power level, guaranteed (LWA)    114 dB(A)
Cutting equipment Chain pitch    .325"
Recommended bar length, min-max    13"-18"
Chain speed at max power    56.76 fts
Chain gauge    0.05 "
Overall dimensions Weight (excl. cutting equipment)    9.2 lbs

Logged

Share on Facebook Share on Twitter

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

    • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Husqvarna 435
« Reply #1 on: May 13, 2013, 08:06:48 pm »
When cut4fun tuned it by ear and then checked by tach, the HS was just below 12,000 which should be good for it was a new chain saw with less than a tank through it.

This one had the Champion RCJ7Y spark plug. A 16" Husqvarna bar and narrow kerf Husqvarna .325 semi chisel chain. It was originally purchased at the local Lowes in late 2009 or 2010 and has been setting in a out building.

It seemed to cut with gusto and good power in 10" wood after cut4fun got the needles set. Seemed like it would be a nice limb saw. It has the splined carburetor screws.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline mweba

  • Piped Saw
  • *****
  • Posts: 392
  • Karma: 55

    • Total Badges: 32
    Badges: (View All)
    Level 6 Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Husqvarna 435
« Reply #2 on: May 14, 2013, 01:40:50 pm »
One of my faves.  We have several T435's in service now.  Good power, easy to work on and cheap.
Logged

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

    • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Husqvarna 435
« Reply #3 on: May 15, 2013, 08:05:34 pm »
My dealer isn't too happy to sell the 435/440, as his experience is that people tend to believe thay are capable of more than they really are. ;)
Logged

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

    • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Husqvarna 435
« Reply #4 on: May 15, 2013, 08:07:36 pm »
Quote from: mweba on May 14, 2013, 01:40:50 pm
One of my faves.  We have several T435's in service now.  Good power, easy to work on and cheap.

Totally different saw, a rebranded Zenoah (Redmax in the US) top handle.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

    • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Husqvarna 435
« Reply #5 on: May 15, 2013, 09:00:02 pm »
I ran that 435 X-Torq a few minutes ago and the owner across the street and I cut a few sticks with it. It certainly is a nice homeowner chainsaw.

I would take it over a Poulan "Wild Thing" any day. I had been tuning & running 50/52cc chainsaws and seen the neighbor out picking up old limbs so I delivered his Husqvarna too him and we ran it some.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

    • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Husqvarna 435
« Reply #6 on: May 20, 2013, 10:50:10 pm »
Something I did notice about the Husqvarna 435 while I had it in my possession was that it had a Walbro coil somewhat like on a Homelite weed whacker.

I suspect the coil on the Poulan 5020 may be the same though most of the parts in the Poulan 5020 said Husqvarna on them?

The Husqvarna 435 in spite of its Number sequence of 435 is a 42cc chainsaw and really whirls the .325 X 16" narrow Kerf chain.

The 435 is many times the saw that the current Poulan "Wild Thing" is.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23730
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

    • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Husqvarna 435
« Reply #7 on: January 01, 2015, 01:37:15 pm »
Just saving IPL

Husqvarna 435 435e 440 IPL  http://www.remsad.ru/files/pil_Husqvarna/435.pdf
Logged

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22

    • Total Badges: 21
    Badges: (View All)
    Level 5 Third year Anniversary Second year Anniversary Avatar Topic Starter Level 4
Re: Husqvarna 435
« Reply #8 on: January 01, 2015, 04:49:41 pm »
They are a nice little saw!
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

    • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Husqvarna 435
« Reply #9 on: January 01, 2015, 05:01:32 pm »
The problem with my neighbor's 435 is that it isn't mine.

I think it is narrow kerf for it has that unusual symbol on the bar that looks like a capital "H" with the top two rungs closer together.

My 025's/MS250 will out cut it but the Stihls are 2 or 3 cc's bigger and have a large tooth .325 chisel chain.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .
Pages: [1] 2   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
2 Replies
649 Views 		Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
Husqvarna 350

Started by rob67 « 1 2 ... 9 10 » Husqvarna

93 Replies
3642 Views 		Last post December 05, 2015, 10:18:36 pm
by Cut4fun .
husqvarna 36

Started by Cut4fun . « 1 2 » Husqvarna

15 Replies
917 Views 		Last post November 15, 2015, 05:04:45 pm
by Cut4fun .
2 Replies
446 Views 		Last post December 04, 2015, 02:58:10 pm
by SawTroll
7 Replies
1097 Views 		Last post January 31, 2016, 12:49:24 pm
by 660magnum
4 Replies
740 Views 		Last post November 07, 2016, 05:46:56 pm
by oldpro
20 Replies
2498 Views 		Last post March 21, 2018, 10:47:30 am
by Cut4fun .
1 Replies
462 Views 		Last post October 26, 2016, 03:40:28 pm
by Eccentric
Husqvarna 61

Started by Cut4fun « 1 2 » Husqvarna

17 Replies
951 Views 		Last post October 28, 2016, 02:39:12 pm
by Eccentric
2 Replies
382 Views 		Last post November 27, 2016, 12:54:51 am
by weimedog